Narex Cabinet Chisels Now Available

Timbecon

Narex Cabinet Chisels Now Available

We first came into contact with the Narex chisel range from David Howlett at the Perth Wood School bemoaning the fact that a range of good quality but accessibly priced chisels were not available from a company in Australia. He had imported and tried several brands at the school and the Narex chisels stood head and shoulders above many brands he'd tried for their mix of excellent pricing - and most importantly for him - great quality to use in classes.

We had a good look at the chisels and were blown away by them too and are proud to announce that we have brought the first shipment in - covering the most common and popular cabinet chisel types needed - including standard cabinet, butt, mortice plus a number of speciality woodworking chisels.

Check out the full range in the Cabinetmaking Chisel sub-category and have a look at a few below too. In future shipments we will be expanding the range with paring, skew and crank necked chisels so if you're interested in any of these please let us know and we can put you down to contact you when they arrive.

Saturday Morning Demonstrations

Demonstrations are starting in Perth this Saturday at 9:00am. Go to the Perth Demonstrations page to see what's coming up between now and Christmas. The Melbourne schedule - due to start on 17th October at 9:00am - will be posted early next week.



 

Cabinet Bevel Edge Chisels

The classic design bevel-edge has a narrow land on each side, providing excellent clearance when chiselling into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in tight recesses. 

The clear varnished beech handles are an ergonomic oval shape that sits comfortably in the hand and resists rolling around on a bench. Reinforced with steel hoops and ferrules for strength the chisel length varies from about 250 - 300mm.

Normally Starting At Just $19.90


RRP's shown on site - add to the Cart to view discount

Buy Now

Mortice Chisels  

Cabinet Mortice Chisels

The traditional mortice chisel design has relieved edges and taper from tip to shoulder for sidewall clearance with a significantly thicker cross-sectional shape to be able to chisel and lever out large quantities of material in deep recesses whilst still maintaining its shape.

The stained, waxed beech handles are an ergonomic oval shape that sits comfortably in the hand and resists rolling around on a bench. Reinforced with steel hoops and ferrules for strength the blade length is approximately 145-150mm with the overall length generally around 300mm long.

Normally Starting At Just $31.90


RRP's shown on site - add to the Cart to view discount
Buy Now

 

Corner Cleaning Chisel

This special corner cleaning chisel enables the smooth and precise squaring of corners at a 90º angle, after a mortise has been cut out by hand or with a machine. The square section size is 10 x 10mm so can handle cutting square corners in all material.

The unfinished hornbeam wood handle sits comfortably in the hand. A brass ferrule secures the tang to the handle with a working depth of approximately 60mm. The blade length is approximately 120mm from tip to bolster with an overall length of around 265mm long.

Normally $69.90, with 15% Off
Now $59.41 until 18th October

RRP shown on site - add to the Cart to view discount

Butt Chisels  

Butt Chisels

Butt chisels were named for their use in installing butt hinges but now find wider acceptance with woodworkers as an easy to control, shorter chisel that fits more comfortably in smaller hands and are primarily used for cutting and paring tasks. It still has the classic design bevel-edge with a narrow land on each side, providing excellent clearance when chiselling into tight recesses. 

Normally Starting At Just $24.90


RRP's shown on site - add to the Cart to view discount

Blocked Cabinet Chisel Set

Blocked Cabinet Chisel Set

This set includes the most commonly used chisel sizes - 6mm, 12mm, 16mm, 20mm, 26mm & 32mm (not commonly found in most sets) and comes in a wooden block - a unique storage option for woodworking chisels as it can be positioned so all sizes are in easy reach on a workbench or mounted on a pedestal.

Normally $149, with 15% Off 
​Now $126.65 until 18th Oct.

RRP shown on site - add to the Cart to view discount

 

Dovetail Chisels

Dovetail Chisels

Following a similar design to Japanese dovetail chisels, the triangular shape with hollow-ground back excels at removing waste from between dovetail pins. They are also suitable for a variety of other tasks because their triangular sections and narrow edges allow them to work adjacent to any inclined surface.

The blade length measures approximately 63mm with a shaft length from tip to bolster of 130mm and an overall length of approximately 270mm long.

Normally Starting At $64.90

RRP's shown on site - add to the Cart to view discount

 


Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here