Torquata Router Bits

All items below are on special through to 31st May or until stocks last!

Results 1 - 20 of 20 Show: Sort By:
  • On Sale

    1/2in Shank Straight Stair Tread Bit

    Stair tread bits are designed to remove large amounts of material in either planing, grooving or rebating operations with cutting blades running along the entire top edge of the bit and large cutaways for chip ejection.

    » View More

    From $24.90 May Sale! (inc GST)
    RRP: $31.00
     
  • On Sale

    Birdsmouth Jointing Bits

    Birdsmouth joints are a traditional joint used in making masts. These bits allow you to do this, but more interestingly, allow you to make multi-sided vessels. These bits will allow you to use timber up to 22.2mm (7/8in) thick for flush joints, but to make cylindrical pieces, use thicker material and then turn or plane down to the round shape. All bits have a 1/2in shank and should be used in a router table. Length of bit = 22.2mm, Diameter of bit 38.1 - 41.3mm

    » View More

    From $44.00 May Sale! (inc GST)
    RRP: $55.00
     
  • On Sale

    Crown Moulding Bit Profile #55 CM-55-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #56 CM-56-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #57 CM-57-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #58 CM-58-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #59 CM-59-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Edge Banding Groove Set EBSET-254-H

    Simply centre and run the groove cutter along the edge of your veneered MDF or ply board to cut the 60° profile and then centre and run the tongue cutter along your timber edging to match the veneer to create a snug, strong and virtually invisible joint. Suits material 12.7 – 25.4mm thick.

    You can even run the timber edging taller than the main board to create the appearance of a thicker table, say using a 30mm high edging on 19mm to create the appearance of a 30mm-thick table.

    » View More

    May Sale! $95.00 (inc GST)
    RRP: $129.00
     
  • On Sale

    Face Moulding Router Bit #1 FM-01-BH

    Create your own decorative mouldings for architraves, skirtings, picture frames and cover beads with this face moulding cutter. To get a quality cut it is essential to fix the router into a router table and run the timber against a substantial fence - so you can use the timber by holding it against the fence using feather-boards. 1/2in shank, Cutter depth = 5.6mm, Cutter length = 34.9mm

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $44.00
     
  • On Sale

    Face Moulding Router Bit #2 FM-02-BH

     

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #3 FM-03-BH

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #4 FM-04-BH

    Create your own decorative mouldings for architraves, skirtings, picture frames and cover beads with this face moulding cutter. To get a quality cut it is essential to fix the router into a router table and run the timber against a substantial fence - so you can the timber by holding it against the fence using feather-boards. 1/2in shank, Cutter depth = 6.4mm, Cutter length = 34.9mm

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #5 FM-05-BH

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #6 FM-06-BH

    Create your own decorative mouldings for architraves, skirtings, picture frames and cover beads with this face moulding cutter. To get a quality cut it is essential to fix the router into a router table and run the timber against a substantial fence - so you can the timber by holding it against the fence using feather-boards. 1/2in shank, Cutter depth = 12.7mm, Cutter length = 38.1mm

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $58.00
     
  • On Sale

    Face Moulding Router Bit #8 FM-08-BH

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $58.00
     
  • On Sale

    Face Moulding Router Bit Set FMSET-07-H

    For the greatest freedom of choice of face moulding bits in the Australian market today for a gret price, you can't go past the face mould set. The set includes the four common face moulding bits as well as three more that are not readily available so you can choose from some unique profiles. Great as a gift for those who have almost everything.

    » View More

    May Sale! $199.00 (inc GST)
    RRP: $249.00
     
  • On Sale

    Finger Pull & Window Sill Router Bits

    From $36.00 May Sale! (inc GST)
    RRP: $45.00
     
  • On Sale

    Finger Pull Router Bits

    From $28.00 May Sale! (inc GST)
    RRP: $35.00
     
  • On Sale

    Tongue & Groove Router Bit Set - 12mm TGSET-120-BH

    May Sale! $69.00 (inc GST)
    RRP: $85.00
     
  • On Sale

    Tongue & Groove Router Bit Set - 19mm TGSET-190-BH

    May Sale! $69.00 (inc GST)
    RRP: $85.00
     
Results 1 - 20 of 20 Show: Sort By: