Measuring Tool March Madness

All items below are on special through to 31st March or until stocks last!

Results 1 - 24 of 24 Show: Sort By:
  • On Sale

    A shorter version of the digital protractor (overall length 180mm), the addition of the 280mm long chrome-finished aluminium alloy fence turns the protractor into a digital sliding bevel. Because of the additional base, you will find it much easier to use due to the increased stability of the fence. Our pick for accurate angle measurements.

    » View More

    March Sale! $37.90 (inc GST)
    RRP: $44.90
     
  • On Sale

    Two overlapping 1.15mm stainless blades with clear metric and imperial graduations are paired with a digital protractor angle sensor to measure and show the entire 360° range that is accurate to +/-0.2°. A great improvement for setting angles when laying out or for getting an accurate angle on an existing work piece to transfer. The reverse button flips the reading direction of the display on the large, clear LCD display. Overall length of 275mm.

    » View More

    March Sale! $33.90 (inc GST)
    RRP: $39.90
     
  • On Sale
    March Sale! $59.90 (inc GST)
    RRP: $69.90
     
  • On Sale
    March Sale! $42.50 (inc GST)
    RRP: $49.90
     
  • On Sale
    From $12.90 March Sale! (inc GST)
    RRP: $14.90
     
  • On Sale

    Combination square sets are one of the handiest measuring tools as the basic two-piece square set (ruler and try square head) can be used as a small spirit level, plumb level, internal and external try and mitre square, simple marking gauge and height gauge.

    The square head has a miniature scratch awl located in the base to mark work pieces with a face that can be used on 90 degree and 45 degree angles. The protractor head can move in a 180-degree range and also has a bright bubble level to check horizontal levels, while the centre marker head is handy for locating the centres of round work pieces.

    The iGaging set is machinist-shop quality to the US standard with accuracy over the blade of +/- 0.1 degree. All heads are heavy stabilized cast-iron and machined to standard. We doubt you will find another set with this kind of quality at this price. The 2.18mm satin ground blades are graduated in imperial on both sides. Both sets come with sturdy storage cases and will get a lot of use in your workshop.

    » View More

    From $47.50 March Sale! (inc GST)
    RRP: $54.90
     
  • On Sale
    Depth Gauge MC-8601

    •        Durable metal scale measures in inches or millimeters

    •        Thumb lever for easy lock and release of scale

    •        Wide base with large feet

    •        Straddles most table saw throats for measuring while adjusting

    •        Self-standing - Allows a depth to be set while bringing the blade or bit up to the desired level

    •        Large scale markers and view finder - Easily viewed for accurate adjustments

    » View More

    March Sale! $7.90 (inc GST)
    RRP: $9.90
     
  • On Sale

    The large LCD display measures heights and depths accurately up to 150mm in three planes – horizontally, vertically and at 45° in metric, decimalized and fractional imperial in 1/128th graduations! The heavy-duty polycarbonate frame can be used freestanding on flat surfaces so you can use both hands elsewhere and comes with a flat and pointed hardened steel anvil points. Can also be locked for extra accuracy. Accurate to within 0.15mm over the whole length of the range.

    » View More

    March Sale! $24.90 (inc GST)
    RRP: $29.90
     
  • On Sale

    Get engineering accuracy with the MiniMag Height Gauge. The powerful magnetic base clamps to any ferrous metal surface for precise measuring of saw blades, router bits or any other application. It has a very large, clear LCD display that reads in metric, decimalized and fractional imperial in 1/128th graduations. It is IP54-splash water, oil and dust resistant with accuracy over the whole 150mm length of 0.0254mm!

    » View More

    March Sale! $79.00 (inc GST)
    RRP: $89.00
     
  • On Sale
    March Sale! $33.90 (inc GST)
    RRP: $39.90
     
  • On Sale

    Produced to the US standard (0.02mm tolerance), these handy squares have cast-iron machined bases with satin ground blades. The handle can be positioned anywhere along the blade to use as a layout tool as well as a precision square.

    The blade is graduated in imperial on both sides, the 152mm (6in) square has a spirit level in the handle. Like all iGaging products, very well made and a pleasure to use.

    » View More

    From $19.90 March Sale! (inc GST)
    RRP: $23.90
     
  • On Sale

    Produced to German DIN 875-1 Standard, these squares have a square tolerance of 0.005mm and straightness tolerance of 0.0127mm. The 4in square has a 2.18mm blade with 11.18mm base, while the 6in square has a heavy 2.4mm blade and 15.4mm base. Perfect weight in the hand – great to use and accuracy you can rely on.

    » View More

    From $20.90 March Sale! (inc GST)
    RRP: $24.90
     
  • On Sale

     

     

    The 5.00mm hardened steel blades are meticulously ground and lapped for straightness and parallelism, and they have a beveled knife edge with imperial 1/64in scales, which means they can be used as precision rulers. For storage they have a hanging hole as well as a protective case if you prefer to store them in a drawer. Accurate to 0.025mm over the length of blade.

     

    » View More

    From $33.90 March Sale! (inc GST)
    RRP: $39.90
     
  • On Sale
    Exactor MC-8406
    March Sale! $11.90 (inc GST)
    RRP: $17.90
     
  • On Sale

    Produced to the US Standard (0.02mm tolerance), this square is perfect for general-purpose work. Stainless acid-etched graduated blade – metric one side, imperial the other – with a massive hardened chrome finish 17.5mm thick steel base.  While we like using the engineer’s square for setting up machines etc. we’ve found this is THE go-to square for general layout work.

    » View More

    March Sale! $27.90 (inc GST)
    RRP: $32.90
     
  • On Sale
    March Sale! $44.90 (inc GST)
    RRP: $49.90
     
  • On Sale
    Marking Knife IG-34360

    When marking accuracy is paramount, this marking knife will cut a line about 1/10th as wide as a sharp pencil line for greater accuracy. The blade is 38mm long with a comfortable handle that is 125mm long. It is flat on one side and beveled on the other, allowing you to draw the flat side across the reference piece to perfectly mark the edge. It is 100% reversible so is ideal for left or right-handed users. 

    » View More

    March Sale! $12.90 (inc GST)
    RRP: $14.90
     
  • On Sale
    From $75.00 March Sale! (inc GST)
    RRP: $89.00
     
  • On Sale
    March Sale! $44.90 (inc GST)
    RRP: $49.90
     
  • On Sale
    Spring Dividers BSD-200
    March Sale! $19.90 (inc GST)
    RRP: $24.90
     
  • On Sale
    March Sale! $19.90 (inc GST)
    RRP: $24.90
     
  • On Sale
    Striking Knife N-822302
    March Sale! $34.90 (inc GST)
    RRP: $39.90
     
  • On Sale
    From $44.90 (inc GST)
    RRP: $49.00
     
  • On Sale
    March Sale! $37.90 (inc GST)
    RRP: $44.90
     
Results 1 - 24 of 24 Show: Sort By: