M Power has developed the brand new high spec Diamond Cross stones specifically for the Fasttrack to bring you an innovative and powerful combination sharpening system that will have you regaining that razor sharp edge in seconds. Chisel in.. and sharpen. Plane blade in... and sharpen. No set up time... No complicated attachments and No experience needed... It’s that simple. From the total beginner to the most discerning of professionals. The FASTTRACK Sharpening System allied with the new Diamond Cross stones will deliver a flat ground edge every time.
What's Included In The Basic Fasttrack Sharpening System -
Fasttrack Sharpening Base
Fasttrack diamond honing guide holder
220grit Preparation Diamond Cross Plate
450grit Finishing Diamond Cross Plate
All other accessories are available separately as listed above.
The simple sharpening solution - The FASTTRACK Precision Sharpening System is a unique solution that holds the blade to be sharpened stationary and its angle constant while a diamond stone is guided across the cutting edge (at a 90° angle to the tool’s normal cutting direction) at either 25° or 30°, depending on your application, making the bevel flat and the edge true, lasting, and requiring only minimal maintenance unless chipped or neglected. We’ve included Preparation and Finishing Diamond stones so you can start low to gain that super fine edge that makes a cutting tool a pleasure to use. The instructions provided will have you putting a razor edge on your chisels and plane irons within a few minutes of opening the package.
Easy to use - Usage is simple! Insert the coarsest stone into the carriage of the FASTTRACK, place the tool to be sharpened in the bed and steadied against the fence, and glide the carriage along the dovetailed track back and forth until a bright line appears across the entire width of the cutting edge. Move up to the next grit and repeat, again.
Built to last - This is a tough, solid aluminum tool, that’s remarkably compact, ideal for including in any professional or enthusiasts tool bag in the shop or on the road. Get used to working with seriously sharp chisels and planes. Not only is it safer, the results achieved will be noticeably crisper, smoother!
Stropping Attachment (sold separately)
The best way to get a razor-sharp edge on your tools is to strop them with a honing compound after sharpening. M Power have developed an ingenious retro-fit stropping attachment for the Fasttrack Sharpening System.
Simply peel and stick the stropping attachment to the bottom of the base, charge it up with honing compound (we recommend the Kirschen Honing Compound) and ...that's it! You are good to go. Get that razor-sharp edge on your tools that ensure better woodworking.
M Power are now offering a deluxe kit in the Mk2 version. Click here for more info.