Suck Up Some Extraction Savings

All items below are on special through to 31st August or until stocks last!

Results 1 - 42 of 42 Show: Sort By:
  • On Sale

    1HP Dust Extractor

    An economical dust extractor for small home workshop use. It has a 1hp motor which is capable of drawing up to 600cfm. The filter bag can filter down to 35 microns of fine dust. The collection bag size is 370mm (diameter) x 650mm (deep). It has one 4in dust outlet. This extractor has found its way into thousands of workshops around Australia - due to its great value-for-money and reliability. WHILE STOCK LASTS!

    » View More

    From July Sale! $199.00 (inc GST)
    RRP: $219.00
     
  • On Sale

    2HP Dust Extractor FM-300

    A great value-for-money extractor for home workshop use. It has a 2hp motor that is rated to flow up to 1200cfm. It comes with nylon filter and collection bags which can filter down to 15 microns. The collection bag measures 560mm (diameter) and 850mm (deep). It has a single 5in dust outlet with a twin 4in Y-piece supplied. An ideal addition to the workshop with the specifications to suit just about any home workshop application - even when used with large planers. Rated to flow 650cfm. WHILE S

    » View More

    July Sale! $335.00 (inc GST)
    RRP: $369.00
     
  • On Sale

    3HP Dust Extractor FM-400

    This extractor is a great low cost option in a workshop where several machines need to be extracted at one time. It has a 3hp motor that is rated to flow up to 1900cfm. It is set-up with twin nylon collection and filter bags (which can filter down to 15 microns). Each collection bag measures 690mm (diameter) and 1150mm (deep). Because of two collection bags, downtime is greatly reduced because of double collection capacity. It has a single 6in outlet with a triple 4in outlet supplied.

    » View More

    July Sale! $449.00 (inc GST)
    RRP: $535.00
     
  • On Sale

    Air Filter Room Cleaner 1000CFM

    This filter has a 190W motor and is capable of cleaning 1000cfm (7400cuft) of air, or suitable for a workshop with a volume of 200m3. The kit includes a remote control handpiece that can turn the filter on and off and also set the built-in timer to run for a certain amount of time. There is still dust in your workshop when you've finished working - so for best results, run the filter on the 2 hour timer after leaving the workshop. The filter measures 610 x 750 x 310mm (W x D x H).

    » View More

    From $399.00 New Lower RRP! (inc GST)
    Old RRP: $449.00
     
  • On Sale

    Ball Joint Connector YW-1087

    July Sale! $13.00 (inc GST)
    RRP: $16.00
     
  • On Sale

    Blast Gate Connectors

    From $5.00 July Sale! (inc GST)
    RRP: $6.00
     
  • On Sale

    Blast Gate Connectors - Wall Mounted

    From $8.00 July Sale! (inc GST)
    RRP: $10.00
     
  • On Sale

    Compact Dust Extractor

    From $149.00 July Sale! (inc GST)
    RRP: $179.00
     
  • On Sale

    Connector Coupling YW-1070

    July Sale! $6.50 (inc GST)
    RRP: $8.00
     
  • On Sale

    Dust Extractor Dust Cyclone Kit MDCK-200

    July Sale! $199.00 (inc GST)
    RRP: $249.00
     
  • On Sale

    Dust Extractor Fitting Starter Kit DCK-2

    Everything you need to run your dust extractor in the workshop. It includes the following items: 2x 3m lengths of 4in hose, 10x 4in hose clamps, 4x 4in blast gates, 1x 4in Y-piece, 1x 4in saw exhaust hood, 1x 4in floor sweep, 1x 4in planer exhaust hood, 1x 4in universal exhaust hood. Over $220 in value for a very low price!!! Weight shown is cubic rate for transport, not actual weight.

    » View More

    July Sale! $89.00 (inc GST)
    RRP: $110.00
     
  • On Sale

    Dust Extractor Floor Vacuum Kit YW-1106

    July Sale! $69.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Dust Extractor Pleated Filter Cartridges

    Most standard bags will only filter 30 microns, or even a needle felt bag down to 10 microns at best. There are two options to solve the problem of getting dust out of the air – either invest in an air cleaning filter, or add a pleated filter cartridge to your extractor. These cartridges filter down to 1micron dust particles out of the air so it easily removes dust of any dangerous size that can do harm to your health.

    » View More

    From $199.00 July Sale! (inc GST)
    RRP: $219.00
     
  • On Sale

    Dust Extractor Wall Mounted 100mm Kit YW-2000

    New Product! $235.00 (inc GST)
    RRP: $279.00
     
  • On Sale

    Dust Extractor Wall Mounted 63mm Kit YW-1000

    July Sale! $135.00 (inc GST)
    RRP: $159.00
     
  • On Sale

    Dust Hood - Large (Big Gulp) YW-1074

    A great addition to your lathe! This hood has an amazing 420 x 320mm opening to collect large quantities of shaving and funnel it to standard 4in pipe – so easy to hook up to a standard extraction system! It has a leading lip around the outside edge of the opening, so it can be pre-drilled and screwed into place. But it may not suit just the lathe; it can suit just about any situation where extraction outlets aren’t available or easy to install.

    » View More

    July Sale! $16.00 (inc GST)
    RRP: $20.00
     
  • On Sale

    Dust Hood - Medium YW-1083

    July Sale! $9.50 (inc GST)
    RRP: $12.00
     
  • On Sale

    Dust Hood - Small YW-1068

    Many customers want to set up their own collection stands next to their work piece. The problem is finding the right connector as a chute. This dust hood can solve many of these workshop problems. It has a reasonable mouth opening of approximately 250 x 110mm and is tapered for efficient dust flow. It is great as a basic to build a larger hood or simply installing on a workbench or machine to collect dust near the action – such as a drill press.

    » View More

    July Sale! $12.00 (inc GST)
    RRP: $15.00
     
  • On Sale

    Dust Picker Stand and Hood DP-100

    This is probably one of the most versatile and useful extraction accessories! Simply attach the 140mm base to your workbench of the floor and adjust to suit your requirements. The vertical post is height adjustable over a 700 – 1140mm range. The fixed arm is 720mm long and the swing arm is telescoping as well, over a 620 – 900mm range.

    » View More

    July Sale! $99.00 (inc GST)
    RRP: $115.00
     
  • On Sale

    Elbow Fittings

    When you need to go around a 90 degree corner, this elbow will make it easier to navigate the turn. Elbows are a better option to use than hose because the volume within the elbow stays constant, but the volume in hose that has been bent at a 90 degree angle is reduced, therefore reducing efficiency along the whole length of the system. Available for use in 4in (100mm) extraction systems. » View More

    From $5.00 July Sale! (inc GST)
    RRP: $6.00
     
  • On Sale

    Flanged Extraction Inlet YW-1112

    July Sale! $3.20 (inc GST)
    RRP: $4.00
     
  • On Sale

    Flex Cuff Connectors

    From $9.50 July Sale! (inc GST)
    RRP: $12.00
     
  • On Sale

    Flexible Dust Hose

    The hose that we stock is made of heavy-duty polyethylene plastic. It is clear so that blockages are easy to see and are available in a variety of different diameters to suit just about every extraction application. The hose has a reinforced banding around the outside to ensure that retains its shape and is suitably rugged for all workshops. Hose is sold per metre.

    » View More

    From $26.50 July Sale! (inc GST)
    RRP: $32.90
     
  • On Sale

    Flexible Dust Hose Clamps

    From $1.80 July Sale! (inc GST)
    RRP: $2.20
     
  • On Sale

    Flexible Hose Tool-Free Clamps

    From $2.80 July Sale! (inc GST)
    RRP: $3.50
     
  • On Sale

    Floor Sweep YW-1003

    Attach to your hose and run around the shop floor to pick up large shavings or fine dust that may have fallen on the ground. Measuring 610 x 170mm this will make light work of even the messiest floor. Attaches to 4” hose.

    » View More

    July Sale! $8.00 (inc GST)
    RRP: $10.00
    Out of Stock
     
  • On Sale

    Hold Tite Hose Extraction Kits

    From $19.90 July Sale! (inc GST)
    RRP: $24.90
     
  • On Sale

    Hose Hanger Strap

    Mount your hose to the wall or your stands quickly and easily using these brackets. Mount with standard 8-gauge screws (not included) so the hose goes where you want it to.

    » View More

    From $1.20 July Sale! (inc GST)
    RRP: $1.50
     
  • On Sale

    Hose Reducer/Quick Connector YW-1105

    July Sale! $5.50 (inc GST)
    RRP: $7.00
     
  • On Sale

    Hose Reducers/Connectors

    A range of reducers to adapt from one hose size to another. It is always recommended to extract with 4in and higher diameter hoses to get the most out of your extraction system and minimise the distance the dust has to travel in smaller diameter hoses.

    » View More

    From $2.50 July Sale! (inc GST)
    RRP: $3.00
     
  • On Sale

    Hose Stepped Reducers

    From $9.00 July Sale! (inc GST)
    RRP: $11.00
     
  • On Sale

    Hose Threaded Splice 102mm Connector YW-1127

    July Sale! $8.00 (inc GST)
    RRP: $10.00
     
  • On Sale

    Hose Threaded Splice 63mm Connector YW-1088

    New Product! $4.00 (inc GST)
    RRP: $5.00
     
  • On Sale

    Machine Angled Outlet YW-1061

    July Sale! $8.00 (inc GST)
    RRP: $10.00
     
  • On Sale

    Machine Exhaust Hoods

    With the 4” outlet towards the bottom of the hood, they are perfect for using at the bottom of a chute – such as that of a jointer. Recommended where the hood is likely to be installed vertically as gravity will assist in the flow of chips.

    » View More

    From $6.50 July Sale! (inc GST)
    RRP: $8.00
     
  • On Sale

    Right Angle Dust Outlet YW-1079

    July Sale! $5.00 (inc GST)
    RRP: $6.00
     
  • On Sale

    T-Connector Fitting YW-1051

    July Sale! $6.50 (inc GST)
    RRP: $8.00
     
  • On Sale

    Tri-Connector Fitting YW-1134

    July Sale! $15.90 (inc GST)
    RRP: $19.90
     
  • On Sale

    Vacuum Mini Dust Cyclone Kit MDCK-100

    July Sale! $75.00 (inc GST)
    RRP: $89.00
     
  • On Sale

    Y-Connector Fitting

    Perfect to convert a single 4” connection into a twin 4” hose connection. Design provides smooth convergence and minimises blockages compared to a T-Piece.

    » View More

    From July Sale! $6.50 (inc GST)
    RRP: $8.00
     
  • On Sale

    Y-Connector Single Outlet Reducer Fitting YW-1076

    July Sale! $9.50 (inc GST)
    RRP: $12.00
     
  • On Sale

    Y-Connector Twin Outlet Reducer Fitting YW-1136

    New Product! $10.50 (inc GST)
    RRP: $13.00
     
Results 1 - 42 of 42 Show: Sort By: