The Original Incra Jig has been reissued, and the same qualities that made it such a knockout are still relevant in workshops today.
The only two moving parts are the locking knob and the single-piece upper carriage and it indexes on 1.0mm increments with the same 0.025mm positioning accuracy and repeatability of our top-of-the-line LS Positioners – just without the fine adjustment.
The rigid, glass-reinforced resin body provides 200mm of solid fence travel. The patented incremental racks are installed where the halves of the jig meet and when the clamping knob is tightened, the teeth mesh, causing the fence and carriage to instantly “centre up” on the perfect multiples of 1.0mm increments far more precisely than working by eye alone.
By adding the Incra Jig Fence System, 3/8in box joint and 1/2in dovetails can be produced equally spaced or variably spaced. The dovetail template can be made half-blind, through, sliding, or corner-post.
For even more variety, the 11 box joint templates and 29 dovetail templates from the Incra Master Reference Guide can be adapted to the Original INCRA Jig to produce literally billions of joinery variations.
If you need the ultimate in accuracy on other platforms, such as a drill press table or band saw (as shown in the image gallery), then the Original Incra Jig is impossible to beat.