Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
- Economical alternative to contact cement
- Formulated to minimize "bleed-through"
- Moderate speed of set
- No harmful vapors
- Safe - nonflammable
Application Temperature - Above 10°C
Open Assembly Time - 15 minutes (21°C/50% RH)
Total assembly time - 15-20 minutes (21°C/50%RH)
Minimum required spread - Approximately 6sqm / L
Required pressure application - 100-250 psi, depending on substrate
Method of Application - For most consistent coverage a mechanical spreader is recommended.
Cleanup - Damp cloth while glue is wet. Scrape off and sand dried excess.