Want to get started with Biscuit Joining? Buy Pack of 100 of all three sizes for one low price!
Biscuit joining is a simple, quick and effective method of locating two work pieces for jointing timber that was developed by Lamello in Switzerland. You simply put the work pieces together, mark a common point on both and use that as a reference to cut a 4mm slot approximately halfway down the side of the timber, most commonly using either a router bit slot cutter or a dedicated biscuit joining machine.
Squirt glue into the slots on both work pieces, pop a biscuit in and run glue along the remainder of the edge of the joint then clamp it together. The biscuit absorbs the glue, swelling and locking the work pieces in together tight. For thicker materials, you can use two biscuits in the same location at differing heights increasing the joint strength even more.
It is a very simple, quick and effective method of assembly that is used commonly in the joinery industry.
Biscuits are available in three common sizes to suit different size work pieces with the most common size being the largest – the #20 biscuit.
- #20 biscuit - 56 x 23mm
- #10 biscuit - 53 x 19mm
- #0 biscuit - 47 x 15mm