January Sale

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

Increased feed rate and improved cutting quality for enhanced productivity with CMT!

TECHNICAL FEATURES:

A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer.

Increased feed rate and improved cutting quality for enhanced productivity with CMT!

TECHNICAL FEATURES:

  » View More

  » View More

  » View More

  » View More

These 3 piece sets will produce beautiful raised panel doors with a classic, diminutive bevelled profile. Designed for use in fine furniture making, these sets include two matched cope and stick bits for producing frames from 15,87mm (5/8”) to 19mm (3/4”) thick. The stick bit shapes a decorative 4,76mm (3/16”) thumbnail moulding along the edge of the frame. The panel bit is designed for 12,7mm (1/2”) think material. All bits are equipped with guide bearings for shaping curved work such as the small arched panel doors seen on secretaries and corner cabinetry. These sets also produce panels for small chests, lids for small boxes, or drawer fronts. Instructions included .

Equipped with thick carbide tips and negative shear angle design, CMT Mortising bits guarantee you a flawless performance. Mortise perfect hinges with no splintered edges or rough bottoms. They also make an easy job of piece work in both natural wood and wood composites. Fit most popular mortising jigs. The CMT mortising bit with top bearing guide is the perfect bit for sign making or any kind of template work.

Shop tips: these bits are excellent for making through mortise. Use a straight bit (711.130.11) to groove the area to make the through mortise. With a drill bit (517.130.31) bore a hole through the wood at one end of the groove. Turn the workpiece over to finish the mortise. Use a flush trim bit with a cutting length slightly longer than the fillet, following the groove made on the opposite side of the workpiece with the ball bearing guide.

3 in 1 new flush trim bits with Delrin® triangular bearings are your best partner for laminate trimming. In fact they solve 3 of the most common problems that occur in flush trimming in cabinet shops. 

1) The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue. 
2) The extended guide surface of the new Delrin® bearing will perfectly match the work surface without scratching like the steel bearing would. The Delrin® bearing also guarantees maximum stability. 
3) The shear angle cutting edge reduces the need for filing. 3 in 1 bits are ideal on plastic laminates as well as aluminium laminates! 

3-in-1 bits are ideal on plastic laminates, as well as on aluminium laminates! 

Bearing is patented. Patent no. D628,218. 
-Extended guide surface.
-Non-freezing.
-Non-scratch surface.

If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece, then you definitely must include CMT straight bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality CMT products. Made of special Fatigue Proof® steel and micrograin carbide, our straight bits can withstand even the heaviest work load and still give you a smooth, precise cut every time. You also get exceptional chip ejection to allow cleaner and more constant cutting. The surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue. Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods.

If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece, then you definitely must include CMT straight bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality CMT products. Made of special Fatigue Proof® steel and micrograin carbide, our straight bits can withstand even the heaviest work load and still give you a smooth, precise cut every time. You also get exceptional chip ejection to allow cleaner and more constant cutting. The surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue. Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods.

Shop tips: more than one pass is recommended when making cove edges. To prevent splintering, begin with a shallow initial pass and deepen gradually.

Notice: these bits must be used with and edge, separate guide or fence.

<div id="tabs" style="padding: 0px 0px 0px 14px; margin: 0px; border: 0px; background-image: url(http://www.cmtutensili.com/img/tab_bg_sx.gif); background-attachment: scroll; color: rgb(119, 119, 119); font-family: 'Trebuchet MS', Arial, Helvetica, sans-serif; background-position: 0% 0%; background-repeat: no-repeat repeat;"> <div id="tabs_2" style="padding: 0px 14px 0px 0px; margin: 0px; border: 0px; background-image: url(http://www.cmtutensili.com/img/tab_bg_dx.gif); background-position: 100% 0%; background-repeat: no-repeat repeat;"> <div align="justify" style="padding: 0px; margin: 0px; border: 0px;"><font size="2" style="padding: 0px; margin: 0px; border: 0px;">Slot cutters for sidelong grooves. They feature 8mm (5/16") bore diameters, 47,6mm (1-7/8") cutting diameters and cutting length from 1,6mm (1/16") to 6,4mm (1/4").</font></div> <div> </div> </div> </div> » View More

CMT put the work capacity of several different bits all into one. The perfect bit for furniture makers, the CMT ovolo allows you to make beautiful beadwork, edgework and veins. Use these bits on automated router systems or with a fence to produce a wide variety of single and double bead profiles and roundovers like those illustrated below by simply adjusting the height or depth of the cut.

Make simple or elegant furniture, doors and drawer fonts by adding a final touch with CMT cove bits. Join them together with a CMT roundover bit and make perfectly fitting rule joints, ideal for drop leaf counter and table tops. These bits feature anti-kickback design, carbide-tipped cutting edges, Fatigue Proof® steel body and PTFE non-stick coating.

The smaller bearing on the CMT Beading bits makes a delicate inset at the base of the cut, giving you the advantage of an extra decorative option. Be sure to keep the black bearing washer right side up to correspond with the bearing rotation when reassembling the bearing. Improper reassembly can cause the bit to unscrew. All CMT roundover bits have a 12,7mm (1/2") bearing diameter with the exception of the radius 28,6mm (1-1/8") and 31,7mm (1/4") bits which have a 19mm (3/4") bearing diameter. You have 13 different radii to choose from, the majority having 5 shank diameter options. All bits are made of Fatigue Proof® steel and have carbide-tipped cutting edges.

Shop tips: for best results, multiple passes are recommended.

Notice: these bits must be used with and edge, separate guide or fence.

Ship tips: for best results, multiple passes are recommended.

Shop tips: for best results, multiple passes are recommended.

For more CMT ogee profile options, choose among plunge ogee bits with top bearing. Excellent for achieving accurate decorative work and guaranteed for long lasting performance.

Originally intended for shaping window sill edges, these bits are also used for creating finger pulls on your door and drawer edges. These bits are also available with a bearing for curved template work and straight cuts against the fence.

<p><span style="color: rgb(119, 119, 119); font-family: 'Trebuchet MS', Arial, Helvetica, sans-serif; font-size: small; text-align: justify;">Turn a small investment into a big return with these CMT bits! They give you well-proportioned smooth curves for elegant eye-catchy work on your tables. CMT hand rail bits feature 30&deg; bevel edge and 3,2mm (1/8&quot;) bead that allow you to make beautiful and functional hand rails. Add a touch of class to your architectural settings!</span></p> » View More

CMT chamfer bits can cut clean, accurate bevels and chamfers and are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. See illustration below for examples. Can be used for working larger scale projects such as beams and columns with excellent results.

<div id="tabs" style="padding: 0px 0px 0px 14px; margin: 0px; border: 0px; background-image: url(http://www.cmtutensili.com/img/tab_bg_sx.gif); background-attachment: scroll; color: rgb(119, 119, 119); font-family: 'Trebuchet MS', Arial, Helvetica, sans-serif; background-position: 0% 0%; background-repeat: no-repeat repeat;"> <div id="tabs_2" style="padding: 0px 14px 0px 0px; margin: 0px; border: 0px; background-image: url(http://www.cmtutensili.com/img/tab_bg_dx.gif); background-position: 100% 0%; background-repeat: no-repeat repeat;"> <div align="justify" style="padding: 0px; margin: 0px; border: 0px;"> <div>The&nbsp;cavetto&nbsp;bit cuts beautiful, traditional profiles, but you may also use just a portion of the bit to cut a more simple and cleaner cove edge. This bit add a special touch to furniture pieces by making traditional cove profiles with top and bottom&nbsp;fillet&nbsp;grooves in any kind of wood and wood composites.</div> &nbsp; <div>Important:&nbsp;always assemble the black bearing heat shield with the raised side up when changing the bearing. Improper assembly will cause the screw to come loose and the bearing to fall off when routing.</div> </div> </div> </div> » View More

This new CMT bit produces a classic single or double edged bead. Ideal for creating a marked decorative effect on panel, door and drawer work.

These bits are designed for undermount applications joining the countertops and sink bowls with a 10 (degree) beveled edge. Can be used with the 880.541.11 and 880.542.11 for complete undermount applications. For use on hand-held routers. Features a non-marring Delrin® bearing to protect the finished edges.

Special angled Delrin® sleeve on the bearing of the CMT bevel cutter lets you work without leaving marks on the workpiece. Trims and shapes all wood and wood materials. Perfect for kitchen and bathroom counter top work.

Create elegant countertops with flawless results. Features a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.

Use these bits to create a traditional roundover edge on solid surface countertops. Equipped with a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.

These bits roundover and trim the countertop edges after the bowl is mounted. Can be used with the CMT 8/980.551.11 and 8/966.501.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl. For use on hand-held portable routers. Features a non-marring Delrin® bearing to protect the finished edges.

Edge profile bit designed to create a 15° bevel on solid surface countertops. Can also be used for European type topmount installation with sinks and bowls. For use on hand-held portable routers.

This bit is ideal for creating custom drainboard patterns in solid surface countertops. For use on hand-held portable routers.

Make classic raised panel doors with these CMT bits. They feature carbide cutting edges, our trademark orange coating and anti-kickback design for safety.

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

  » View More

Rout 19mm wide x 9.5mm deep channels or rebates to install the T-Track. Designed to work with 5/16in size thread hardware, the track comes undrilled so you can choose where you want your own mounting holes (use 3/16in twist drill bit to create screw holes quickly and easily). Ribbed on the outside to grip the walls of the timber around it and anodized silver for long life.

As shown in an enlarged image, it has been designed so when using the included screws, the screw head clears the t-track bolt or nut running above it so countersinking the screw head is not required.

All track comes standard with four mounting screws, please let us know when ordering if you need any more.

  » View More

  » View More

  » View More

  » View More

  » View More