Carnauba Polish is a fast-drying surface finish, rich in carnauba wax and beeswax. Very soft and easy to apply, it hardens quickly and when buffed, imparts a beautiful hard, high sheen.
Used For
|
A surface finish for waxed or oiled timber. Also suitable for non-porous surfaces such as metal, marble, slate and concrete. Ideal for use over chalk paint and Venetian plaster.
|
Surface Preparation
|
Ensure the surface is clean and dry before application. Timber needs to be previously waxed or oiled before application. Not suitable for raw timber.
|
How to Apply
|
- Dip a clean, lint-free cloth and spread sparingly over the surface, not more than one square metre at a time, in a circular motion.
- Buff back vigorously with a soft, lint-free cloth or buffing pads.
- Use up to three coats, buffing well between each coat. Allow 20 - 30 minutes between coats.
|
Dry Time
|
20 minutes provided excess is wiped away.
|
Maintenance
|
Depending on wear, apply if the waxed area becomes dull or faded.
|
Clean Up
|
Warm, soapy water for hands or cloth. Excess wax on timber; dampen a cloth with d-limonene or mineral turpentine.
|