Traditional Joinery Methods

All items below are on special through to 28th February or until stocks last!

Results 1 - 8 of 8 Show: Sort By:
  • On Sale

    Biscuit Joiners

    Biscuit joining is a simple, quick and effective method of locating two work pieces for jointing timber that was developed by Lamello in Switzerland. You simply put the work pieces together, mark a common point on both and use that as a reference to cut a 4mm slot approximately halfway down the side of the timber, most commonly using either a router bit slot cutter or a dedicated biscuit joining machine.

    Squirt glue into the slots on both work pieces, pop a biscuit in and run glue along the remainder of the edge of the joint then clamp it together. The biscuit absorbs the glue, swelling and locking the work pieces in together tight. For thicker materials, you can use two biscuits  in the same location at differing heights increasing the joint strength even more.

    It is a very simple, quick and effective method of assembly that is used commonly in the joinery industry.

    Biscuits are available in three common sizes to suit different size work pieces with the most common size being the largest – the #20 biscuit.

    - #0 biscuit - 47 x 15mm
    - #10 biscuit - 53 x 19mm
    - #20 biscuit - 56 x 23mm

    » View More

    From $7.90 February Sale! (inc GST)
    RRP: $8.90
     
  • On Sale

    Dowel Centre Points

    From $3.90 February Sale! (inc GST)
    RRP: $4.50
     
  • On Sale

    Dowel Jig Kit MC-1359

    February Sale! $32.90 (inc GST)
    RRP: $37.90
     
  • On Sale

    Dowel Joiners

    From $3.90 February Sale! (inc GST)
    RRP: $4.50
     
  • On Sale

    Drill Bit Stop Set of 6 H-710

    February Sale! $7.50 (inc GST)
    RRP: $8.90
     
  • On Sale

    JointPro Dowelling Jig

    Even Novice Woodworkers Can Make Professional-Calibre Doweled Joints

    The JointPro™ quickly and accurately creates strong dowelled joints. The interchangeable hardened steel bushing blocks allow you to drill up to six matching holes per setup.

    The self-clamping jig securely holds work pieces in place as you drill as it includes two detachable clamps allowing for horizontal or vertical positioning. It also includes non-slip pads that prevent both slipping and marring. 

    » View More

    From $109.00 (inc GST)
     
  • On Sale

    Simple Dowelling Kit

    A set which represents good value for dowelling which includes drill, drill stop, 4 x centre points, 20 fluted dowels in each of four sizes.

    » View More

    From $11.90 February Sale! (inc GST)
    RRP: $13.90
     
  • On Sale

    Slot Cutter Router Bit Assemblies

    Use slot cutters for cutting grooves, trenches and shallow rebates quickly and easily into the edge or face of timber for a variety of applications. You can stack multiple slot cutters on top of each other to increase the cutting height. Biscuit jointing is a simple, effective and strong method of jointing two boards. Simply cut a slot in the timber 4mm thick, squirt some glue and put the biscuit in on one side and you can quickly and effectively locate two work pieces when jointing. The bearing is designed to cut to the depth of the popular #20 Lamello biscuit size. 

    » View More

    From $28.00 February Sale! (inc GST)
    RRP: $35.00
     
Results 1 - 8 of 8 Show: Sort By: