FastCap 2P-10 RT Jel Glue
FastCap 2P-10 RT Jel glue is a specialist glue. It is extra thick and can be used for vertical surfaces where you want the glue to stay put. This adhesive glue can get into tight spots to create a virtually unbreakable bond between both sides. It can also be sanded so it is flush with the surface of the material, which makes it perfect for professionals. This is yet another innovative member of the FastCap 2P10 family.
What is Rubber Toughened?
FastCap has taken rubber particles and put them into the glue. Why? This gives the glue a little more elasticity. So if you are working with an environment which is subject to vibration, heavy shock loads or maybe even environmental movement in wood grain, this glue will be able to account for it a little more. On top of this, it is around 10% stronger than the standard 2P-10 glue.
What is the 2P-10 system?
2P-10 is a two-part ten-second adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. However this is more than just a 2 part adhesive. FastCap have gone a step further to design a full range of adhesives, applicators and colourants to meet all your rapid adhesive needs. So much more than other CA glues that think they're super.
2P-10 can be used on any material as long as it is clean and the surface is well prepared. The surface should be clean, with no oil, and slightly etched so the glue can bite more effectively. It should not be used in lieu of a weld (on metal), but it is very effective for tacking, to hold a piece in place.
For more information on this product click here.
For the MSDS click here.
||2P-10 RT Jel Glue
The glue has a shelf life of 2 years from the manufactured date, regardless of whether it has been opened or not. Every bottle has an expiration date printed on the side in a 6 digit format (MMDDYY).