FastCap 2P-10 Pincaps Pack of 5
No more glue bottles with clogged tips. There is nothing more annoying then finding a glue bottle that is half full but the tip is completely clogged with solid glue. The FastCap Pincaps are the solution to this problem. Desined to fit over all FastCap 2P-10 bottles. The pincaps include a small pin that goes down the nose of the bottle stopping it from completely drying shut. The claws that grab the outside of the nozzle provide a stable and tight clamp, ensuring that the cap won't come off whilst in use. This is yet another innovative member of the FastCap 2P10 family.
What is the 2P-10 system?
2P-10 is a two-part ten-second adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. However this is more than just a 2 part adhesive. FastCap have gone a step further to design a full range of adhesives, applicators and colourants to meet all your rapid adhesive needs. So much more than other CA glues that think they're super.
2P-10 can be used on any material as long as it is clean and the surface is well prepared. The surface should be clean, with no oil, and slightly etched so the glue can bite more effectively. It should not be used in lieu of a weld (on metal), but it is very effective for tacking, to hold a piece in place.
For more information on this product click here.
For the MSDS click here.