Dust Deputy Cyclone Deluxe Kit

  • Dust Deputy Cyclone Deluxe Kit AXD-000004A

    Oneida's Cyclone Dust Collector Eliminates Suction Loss With Any Wet/Dry Vacuum

    Comes with everything you need to convert your wet/dry vacuum into a two-stage, dust-free system including the AS cyclone, SD hose, elbow adapters, 5 gallon buckets, caster wheels, gasket, and mounting hardware.

    The Dust Deputy Deluxe lets you work the way you want to. Injection molded from a translucent anti-static resin, the patented design of the Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss!

    The Dust Deputy will save you countless time and money on expensive replacement filters and dust bags, allowing you to keep working harder, longer, and safer than ever! This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0" ports for secure fittings using a variety of hoses sizes.

    The Dust Deputy Deluxe Kit Includes:

    • Anti-Static Dust Deputy Cyclone Separator
    • Two 5 Gallon, 100-Mil, Plastic Buckets: Sidecar Bucket (for mounting to shop vacuum) and Dust Bucket (with pre-cut lid with bolt and center holes)
    • 3' x 2.5" Static Dissipative Hose
    • Two 90 Degree Static Conductive Hose Elbow Adapters
    • 1.5" – 2.5" Quick-Release Hose/Band Clamp
    • Three 1.5" Non-Marking Casters Wheels
    • Neoprene Foam Gasket and Mounting Hardware

    What's so good about the Vacuum Dust Deputy Cyclone Deluxe Kit?

    Upgrade any make and model wet/dry vacuum into a two-stage dust control system with our patented cyclone separator. Removes over 99% of dust and debris from the airstream, containing it in an easy-to-empty 5-gallon bucket, before it ever reaches the vacuum - virtually eliminating filter clogging and suction loss! Kit includes everything you need to connect to the vacuum including: 3' vacuum connection hose, elbow adapters, caster wheels, and a dual "sidecar" bucket for mounting to the vacuum directly.

    Standard wet/dry vacuums rely entirely on their small cartridge filters to clean the incoming air before recirculating it into the room. These filters can quickly become clogged with dust and debris, significantly reducing the vacuum's air suction performance. This is especially true for applications that create a large amount of fine dust such as wood sanding and drywall sanding.

    In order to restore your vacuum's airflow you'll need to take the time to open up your vacuum and clean the filter, but how do you know when do it? And did you know that each time you clean it out, whether by tapping it out or washing it, you permanently damage the fine fiber construction and reduce the lifespan and performance of the filter? Eventually you'll have to clean it out again, or worse, have to replace it entirely!

    The Dust Deputy solves this problem by stopping dust before it ever reaches the vacuum.

    Works With Nearly Any Type of Material:

    • Wood Dust
    • Drywall Dust
    • Concrete Dust
    • Clay/Silica Dust
    • Blasting Soda
    • Cooled Ash & Soot
    • Water
    • Metal Shavings
    • Baking Flour
    • Grass & Leaves
    • Pet/Animal Hair
    • Pharmaceutical Waste
    • and much more!

    How does the Dust Deputy work?

    The Dust Deputy is cyclonic pre-separator designed for any make, size, or model wet/dry vacuum. Its patented design uses centrifugal force to literally spin dust and debris out of the air-stream, trapping it in a container below; NOT in your vacuum! The Dust Deputy will separate out over 99.7% of nearly any type of dust and debris, with less than 1% making it into the vacuum – significantly extending the life of your vacuum and saving you countless time and money on expensive replacement filters and dust bags!

    Injection molded from a translucent anti-static resin, the cyclone's simple and efficient design can be adapted for use in any shop. It also features tapered inlet and outlet (2" inner diameters), allowing for easy and secure fitting with a variety of different hose types and diameters.

    The Dust Deputy cyclone is Made in the USA under strict Lean 6 Sigma guidelines, ensuring a higher quality product, reduced costs, and improved customer satisfaction.

    What the Dust Deputy can do for you:

    • Increased Suction Power: Most wet/dry vacuums clog up rapidly but with over 99% of the waste getting trapped in the Dust Deputy's drum, the filters stay cleaner for longer and power drop-off is significantly less.
    • Longer Lifespan: With the reduced amount of dust loading onto the filter and with less cleanings needed you'll get longer filter life overall.
    • Easier Waste Disposal: Now you can easily empty your dust and debris from the bucket without ever having to open up your vacuum.

    Cyclone Dust Collector Specifications

    Airflow Rating 50 - 150 CFM
    Waste Capacity 5 Gallon
    Portable Yes
    Inlet Size 2" O.D. (Tapered)
    1-3/4" I.D.
    Outlet Size 2" O.D. (Tapered)
    1-3/4" I.D.
    Width 12"
    Depth 12"
    Height 29.25"
    Height to Center of Inlet 25.125"
    27.125" w/ casters
    Primary Build Materials Polyethylene
    Static Resistance Rating Anti-Static
    Color Clear
    Contents Cyclone, Pre-Cut Bucket, Sidecar Bucket, Caster Wheels, Hose, 2x Elbow Adapters, Hardware
    Country of Manufacture United States
    $299.00 (inc GST)

Product Video