Brad Point Drill Bits - Imperial

  • Brad Point Drill Bits - Imperial

    Brad point bits are true wood boring bits. They are designed with a centre spur to locate the centre of the hole easily, with perimeter cutters to cut the outside of the hole and horizontal scapers to remove the wood which can peel upwards through the steep spiral to quickly clear the hole. They give a clean, accurate hole and tend to track true rather tan follow the grain.

    This new range of brad point drill bits has been hand selected from a world renowned drill manufacturer. Each bit is manufactured from high-grade tool steel with a high speed cutting edge, which was selected for superior heat absorption characteristics as well as excellent edge-holding capabilities, increasing bit life. Each bit also features large chip ejection channels to reduce boring time.

    Drill bit length ranges from 61mm for the 1/8in bit to 161mm for the 5/8in bit. All bits over 3/8in have a reduced shaft diameter of 3/8in so they can be used in all size hand drills.


    1/8in | 3.2mm
    $2.90 (inc GST)
    3/16in | 4.8mm
    $2.90 (inc GST)
    5/16in | 7.9mm
    $3.50 (inc GST)
    3/8in | 9.5mm
    $4.50 (inc GST)
    7/16in | 11.1mm
    $4.90 (inc GST)
    1/2in | 12.7mm
    $6.90 (inc GST)
    5/8in | 15.9mm
    $7.90 (inc GST)

Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here