SNAP-CHECK makes machine setups a snap! Dialing in truly accurate machine setups on your jointer, table saw and router table can be a fussy, frustrating pain in the neck. The new SNAP-CHECK from iGaging makes tedious trial-and-error nightmares a thing of the past. You'll be amazed at the shop time you'll save setting up your equipment.
On the jointer use SNAP-CHECK to set jointer knives, jointer table parallelism plus the precise depth-of-cut. On a table saw set blades and dado sets for depth-of-cut and also measure blade run-out. On a router table SNAP-CHECK is the perfect tool to set your fence to the exact location and to set your router bit to the perfect height.
SNAP-CHECK is loaded with great features. Its large readout window can display thousandths of an inch, hundredths of a millimeter or fractions to 1/64in. The precision, spring-loaded plunger signals the reading in a range from minus 6.4mm to a full 50.8mm height. It comes standard with both flat and ball tip anvils and a spare battery. Strong magnets hold SNAP-CHECK in place on steel so you can make adjustments using both hands. It can be "zeroed out" with the push of a button and turns off automatically to save battery life.
- 3Way Reading: 0.1mm, 0.0005in, 1/64in
- Accuracy: ±0.001in / 1in
- Battery: 3V CR2032 included