Easily Join Workpieces at 90-Degree Angles - Joining workpieces at 90-degree angles is easy with the Right Angle Clamp. Its steel pin fits snugly into a pocket hole to clamp the pieces together as you drive your screw into the adjacent hole. Using the Right Angle Clamp is like having a helper on hand to hold materials at a perfect 90 degrees.
Clamp Using the Pocket Hole - The steel pin on this clamp is shaped to fit snuggly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw in an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.
Swivel Pad for Solid Clamping - The arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting.
Ultra-Wide Reach - Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.
Use One Clamp, or Use Two - Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.