This economical range of commercial-grade soft-closing European Cabinet Hinges are made to a high-standard for long life and well-priced for discerning cabinetmaking applications.
To install, drill a minimum 11.3mm-deep, 35mm-diameter hole in the door with the mount plate (sold separately) installed on the cabinet carcass so the hinge is clipped on during installation. The opening angle of this hinge is 110° with the ability to work on door thicknesses 14 - 26mm.
This particular hinge is known as no overlay (or inset) which means when the door is closed it can sit completely within the edge of the carcass so is perfect where there is no space for the door to swing open.
These hinges are sold individually and the mount plate (sold separately) needs to be purchased to complete installation. The hinge is recommended to be installed approximately 600mm apart so for standard cabinet doors two are required or more for larger doors as required.
The soft-closing mechanism makes use a real pleasure after installation.