Knockdown Demon Bolts & Cap Nut

  • Knockdown Demon Bolts & Cap Nut

    The M6 cabinet knock-down fitting system is well-known and widely used as it is a simple, yet effective way of assembling furniture that may require dis-assembly in the future and is attractive so if it must be visible, will not detract from the appearance of the furniture.

    The bolts have a standard M6 thread and are produced from steel with a bright electro-plated brass finish. The length is the shaft length - all the heads measure 17mm diameter and are 2mm thick. They use an M4 allen key head to tighten.

    Also available is a corresponding cap nut so that if a through-hole needs to be used, it looks identical from both sides. The cap nut requires a 9+mm hole for clearance and increases the working length of the bolt by 10mm. In other words a cap nut used with a 25mm bolt can bolt together a maximum of 35mm.

    25mm Long
    KDC-25
    $0.40 (inc GST)
    35mm Long
    KDC-35
    $0.40 (inc GST)
    40mm Long
    KDC-40
    $0.40 (inc GST)
    50mm Long
    KDC-50
    $0.40 (inc GST)
    60mm Long
    KDC-60
    $0.40 (inc GST)
    70mm Long
    KDC-70
    $0.50 (inc GST)
    80mm Long
    KDC-80
    $0.50 (inc GST)
    90mm Long
    KDC-90
    $0.50 (inc GST)
    100mm Long
    KDC-100
    $0.50 (inc GST)
    115mm Long
    KDC-115
    $0.60 (inc GST)
    Cap Nut Only
    KDCN-6
    $0.40 (inc GST)
     

Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here