Traditional Brass Shelf Support System

  • Traditional Brass Shelf Support System

    The traditional and attractive brass shelf support system. The solid brass shelf pins (with the support area measuring approximately 8mm long) require a 6.4mm diameter hole drilled 8mm deep into the carcass to seat it.

    You can also purchase the shelf support bushes to dress up the pin holes in the carcass. To use the bushes, drill an 8mm diameter hole 8mm deep to install and these will then securely capture the shelf support pin as well as increase the holding strength of the pin. 

    Sold in pack's of 20 or in bulk packs.

    Also available in economical steel/zinc-plated finish.

     

    Brass Shelf Pins Pk 20
    SSPSB-20
    $9.90 (inc GST)
    Brass Shelf Pins Pk 200
    SSPSB-200
    $67.00 (inc GST)
    Brass Shelf Sockets Pk 20
    SSBSB-20
    $4.00 (inc GST)
    Brass Shelf Sockets Pk 400
    SSBSB-400
    $54.00 (inc GST)
     

Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here