Veritas Tools Inc., based in Ottawa, Canada, is a world leader in woodworking tool design innovation and is the manufacturing arm of Lee Valley Tools Ltd., a leading North American retailer of fine tools. Lee Valley Tools, established in Canada in 1978, began designing and manufacturing its own woodworking tools in 1982. Lee Valley Manufacturing Ltd. incorporated in 1985 and later became Veritas® Tools Inc.

Today, with 250 products and more than 100 patents in lines that include woodworking planes, sharpening equipment, marking and measuring tools, router tables, drilling accessories, and more, Veritas have become a world leader in product development to meet the needs of discerning woodworkers.

The research and development team of engineers, industrial designers, and graphic designers, along with a modern manufacturing and packaging facility, provide dealers, distributors, and retailers around the world with Veritas®. Veritas is synonymous with Innovation In Tools and we hope you join the legion of advocates for their products that use and swear by them.

Results 1 - 85 of 85 Show: Sort By:
  • #4 1/2 Bench Plane

    From $399.00 (inc GST)
  • #4 Bench Plane 05-P-2601

    $369.00 (inc GST)
  • #5 1/4 Bench Plane 05-P-2401

    $399.00 (inc GST)
    Out of Stock
  • #6 Bench Plane 05-P-2801

    $439.00 (inc GST)
  • 102mm Curved Drawknife

    An ordinary drawknife is too large for most carving — the Veritas is designed for ease of use with maximum control.


    The teardrop-shaped handles are cocked at 45° to the blade and nestle comfortably in your hands. The polished 102mm x 3.2mm x 19mm blade is ground and honed to a perfect edge, and is supplied with a blade guard.


    The drawknife blade is custom made by a blade maker in the USA to exacting standards. With walnut handles, it is an attractive tool.


    Optional leather case available separately, made in Canada.

    » View More

    From $125.00 (inc GST)
    Out of Stock
  • 19mm Shoulder Plane

    From $323.00 (inc GST)
  • 32mm Shoulder Plane 05-P-4301

    $374.00 (inc GST)
  • Abrasive Lapping Grit Kit 05-M-0101

    Silicon carbide is ideal for flattening oil and water stones or lapping plane bottoms and blades. Just sprinkle the grit on a piece of glass or a steel lapping plate, add a shot of oil or water (as required), and lap the item flat. This fast and easy process lets you keep all of your stones dead flat.

    90x is used for most applications, while the finer grits are used to put a silky finish on plane bottoms or blades. Grits are available individually or as a set of five 2 oz containers of 90x, 180x, 280x, 400x and 600x and instructions. The 90x is also available in a larger 4 oz container.

    Using PSA-backed plastic laminate sheets on glass speeds up the process, but is not mandatory. 

    » View More

    $44.00 (inc GST)
  • Aluminium Straight Edges

    From $55.00 (inc GST)
  • Angle Poly Gauge 05-N-1401

    Many woodworkers find it hard enough to set equipment for a square cut; they simply give up on cuts for pentagons, hexagons, octagons, etc. The Veritas® Poly-Gauge changes all that.

    » View More

    $60.00 (inc GST)
  • Apron Plane

    From $159.00 (inc GST)
  • Bar Gauge Heads 05-N-3101

    This practical tool provides you with the ability to transfer measurements accurately and efficiently. This system has been is use for centuries and is still used to create 'story sticks' for fit outs and jobs where nothing is square, It is also ideal to check diagonals or to mark out for repetition jobs. Using material 19mm x 6mm you are able to use standard timber sizes and rip two 6mm strips from one edge. They are made of durable ABS plastic and solid brass.

    » View More

    $27.00 (inc GST)
  • Bench Blade 05-G-2210

    $36.00 (inc GST)
  • Bench Dogs & Pups

    From $52.00 (inc GST)
  • Bench Grinder Skew Grinding Jig 05-N-1301

    Skews are among the trickiest tools to use in turning without causing digs.

    To prevent digs, this jig allows you to grind a slight radius rather than a straight 20° skew. It can be used on just about any grinder; all you need to do is drill a 6.4mm (1/4in) hole in the tool rest (if required) to hold the base pin.

    The radius of the grind is determined by the amount the skew projects from the jig. After grinding one side, you flip the skew to the other side of the jig and repeat.

    The skew is clamped in position, which leaves both hands free to regulate grinding pressure and travel across the wheel.

    The pin is steel; otherwise, the jig is brass and anodized aluminum.

    » View More

    $51.00 (inc GST)
  • Bench Grinder Straight Grinding Jig 05-M-0601

    This grinding jig works with any power or hand grinder that has a tool rest.

    Put a tool in the jig, slide it against the alignment pin and one clamping thumbscrew to square it, adjust the blade projection for bevel angle, and tighten in place. The tool is now held squarely in the jig at the chosen bevel angle. Slide the jig back and forth across the tool rest and stone face to sharpen the tool.

    The brass clamping bolts have nylon washers to prevent galling; other parts are made from hard aluminum, further hardened by anodizing to prevent wear. High-friction pads ensure solid clamping without inadvertent misalignment.

    The jig fits in the slot of the Veritas® Grinder Tool Rest (05-M-2301); the riding ledges adapt it to other tool rests.

    » View More

    $44.00 (inc GST)
  • Bench Grinder Universal Toolrest 05-M-2301

    The major weakness of most bench grinders is that the tool rests are virtually useless. It is nearly impossible to find one with a rest that is solid and square.

    The Veritas® Grinder Tool Rest can be used with 6in or 8in utility bench grinders and many belt sanders/grinders. It mounts directly to the bench in front of the grinder and can be readily folded out of the way for freehand grinding.

    The 102mm wide table straddles wheels up to 25mm wide. It is grooved for sliding jigs and center drilled for rotating jigs. The slotted arms allow a wide range of angular and height adjustments. Spring-loaded gyratory handles lock it solidly in position and can be rotated out of the way after locking. You can easily move it from one grinder to another or quickly remove it from the bench.

    Accurately machined, anodized aluminum construction. Included is an angle-setting gauge to set the table to the common bevel angles of 20°, 25°, 30° and 35°.

    » View More

    $86.00 (inc GST)
  • Bench Wonder Dogs & Pups

    These dogs can be used anywhere you can drill a 3/4" hole. You can make a long clamp of any length by drilling 3/4" holes in a piece of 150x50mm timber.

    » View More

    From $69.00 (inc GST)
  • Blade Honing Compound 05-M-0801

    This honing compound, which took over two years to develop, is the most effective on the market.

    It is a blend of both chromium and aluminum oxide to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather or wood.

    Cuts quickly but it leaves a mirror finish with a light wax film. The average size of scratch pattern it leaves behind is 0.5 microns or 0.00002in. Ideal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Used with a felt wheel or leather belt for power honing or with a leather strop for hand honing.

    » View More

    $24.00 (inc GST)
  • Block Planes

    From $259.00 (inc GST)
  • Brass Bevel Angle Gauge 50-K-0901

    Half the secret of sharpening is the control of blade geometry. Nothing is handier than a bevel gauge for quickly checking the grind angle of chisels, plane blades, turning tools, etc. A quick check confirms the angle last used for grinding or honing so that the edge geometry can be maintained.

    The Veritas bevel gauge has seven individual slots that will measure the most commonly used angles from 15° to 45° in 5° increments. Your eye is a fine instrument; it can easily interpolate other angles in the range, angles like 24° or 26°.

    The slots on the gauge are about 19mm deep for good registration. The pocket-sized disc is 63mm in diameter with a center hole for hanging it on a nail.

    Made of solid brass, which will not damage a honed edge and made in USA.


    » View More

    $15.00 (inc GST)
  • Brass Head Carving Mallet 05-E-1401

    $56.00 (inc GST)
  • Brass Marking Gauge 05-N-6501

    $51.00 (inc GST)
  • Bullnose Chisel Plane 05-P-2101

    $85.00 (inc GST)
  • Cabinet Scraper Holder 05-K-3301

    $72.00 (inc GST)
  • Cabinetmaker's Scraper

    From $117.00 (inc GST)
  • Cabinetmaker's Trimming Chisel Plane 05-P-7401

    $219.00 (inc GST)
  • Cabinetmakers Mallet 05-E-1501

    Wooden mallets are well suited to shop work such as driving chisels or larger carving tools. Although they tend to be bulky, the wooden striking faces are much kinder to tool handles than steel-face hammers.


    Inspired by a vintage tool in the Lee Valley collection, this mallet has the best features of both wood and metal and is a direct substitute for a carpenter's mallet. The cast brass head has the mass and small size typical of a metal hammer. The 38mm diameter hardwood inserts provide wooden striking faces so you can strike chisels without mushrooming the handles. Since a cabinetmaker's mallet is used primarily with wrist action, the flat faces are in planes that intersect the handle tip, so the face is 90° to the arc of swing to prevent glancing blows. You can also choke up on the handle for work requiring greater finesse such as fine carving.


    With two striking faces you can keep one smooth and clean for general work. The other face can be used for more aggressive tasks such as driving out bolts, pins, etc., without peening the ends. The 18oz head is fitted with an 275mm long hardwood handle.


    Made in Canada.

    » View More

    $69.00 (inc GST)
  • Canvas Chisel Roll

    From $27.00 (inc GST)
  • Carcass Saws

    From $131.00 (inc GST)
  • Carpenter's Square Fence 05-N-5401

    A carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas® Square Fence.

    » View More

    $42.00 (inc GST)
  • Carpenters Gauge 05-N-3601

    Specifically designed to be carried in an apron or pocket, this is both a direct-reading compass and marking gauge. It has a rotatable head, which locks vertically for use and horizontally for storage and tip protection. It is direct reading both radius and diameter, in inches and centimetres.

    » View More

    $44.00 (inc GST)
  • Centre Marker 05-N-1501

    Made from die-cast aluminium (pre-drilled for mounting near your lathe), it uses a knife-edged steel blade to score the end of a work piece. You set a square or cylinder (up to 150mm across) in the marker, tap it with a mallet, turn the wood approximately 90 degrees and tap it again. The result is two score lines that intersect at the exact centre of the wood.

    » View More

    $44.00 (inc GST)
  • Chair Doctor Glue 05-K-9904

    $26.00 (inc GST)
  • Cornering Tool Kit 05-K-5030

    $57.00 (inc GST)
    Out of Stock
  • Curved Cabinet Scraper Sets

    From $27.00 (inc GST)
  • Dovetail Markers

    For quick, accurate marking of dovetails, a dovetail marker is the best tool available. With riding ledges on both sides, these 2" x 2" markers can be flipped over to mark both slopes of the dovetail. Sold as a set of 2.

    » View More

    From $22.00 (inc GST)
  • Dovetail Saws

    From $125.00 (inc GST)
  • Drill Bit Adjustable Stop Collar Set 86-K-6501

    $14.00 (inc GST)
  • Edge Trimming Plane 05-P-0301

    $199.00 (inc GST)
  • Felt Buffing Wheels

    The finest edge you can get on any tool is with a strop or a buffing wheel. Unfortunately, it is difficult to get that edge without rounding the bevel somewhat when using a wheel. In certain cases (such as with carving tools), a rounded bevel may be desirable, but with chisels and plane blades, it is best to maintain a predetermined bevel angle. A hard felt wheel is best for that.

    When the wheel is dressed with the Veritas blade honing compound, the edge obtained is comparable to most razor blades.

    A medium felt wheel is still very firm, but is more suitable for carving tools where controlled bevel rounding is desirable to give edge strength. A narrow, medium felt wheel is best for the inside of carving gouges.

    All felt wheels are bored for 15.9mm (5/8in) diameter arbors, but a 12.7mm (1/2in) bushing is provided. Maximum speed rated to 3600rpm.

    » View More

    From $62.00 (inc GST)
  • Flush Cut Saw 05-K-3410

    $44.00 (inc GST)
  • Flush Plane

    From $68.00 (inc GST)
  • Gents Saws

    From $93.00 (inc GST)
  • Grey Iron Lapping Plate 05-M-2020

    Measuring 305 x 105 x 29mm high and weighing approximately 6.35kg, this is one substantial lapping plate! Made from an iron chosen for its dimensional stability and material consistency (you won't find blade-scratching carbides in the material), the bottom and sides are machined, and the top is ground flat to within 0.025mm over the entire surface. The unique channel design, optimized for a figure-eight lapping pattern, serves to eliminate resistance from hydraulic lock and captures excess oil, abrasive and slurry.

    For fingertip safety, the channels have been chamfered to eliminate sharp edges and corners. Not intended for heavy material removal, it is designed to condition or smooth previously ground surfaces and is used with light mineral or honing oil and silicon carbide (SiC) abrasive grit.

    Veritas offer a range of grits, but recommend 280x for twisted, wavy or linished objects, 400x for ground surfaces with a slightly rough texture, and 600x for surfaces requiring little material removal. While any grit size will ultimately achieve the same end result (since particles become progressively finer during the lapping process), the coarser the abrasive, the longer it takes to achieve a smooth surface.

    A useful tool for improving the surface quality of plane soles, blades and chisels, it will lap materials up to the same surface area of the lapping plate, accommodating even a jack plane sole.

    » View More

    $163.00 (inc GST)
  • Hand Plane Fence 05-P-3001

    $77.00 (inc GST)
    Out of Stock
  • Hand Plane Variable Angle Fence 05-P-3004

    $101.00 (inc GST)
  • Layout Saddle - Dovetails

    From $26.00 (inc GST)
  • Layout Saddle - Mitres 05-N-5615

    The compact mitre saddle is ideal for marking 45º angles on small items such as picture frames. The sides are machined so that a line can be accurately transferred around work piece corners. Light and durable, it will never mark your work.

    » View More

    $27.00 (inc GST)
    Out of Stock
  • Layout Saddle - Square 05-N-5601

    $27.00 (inc GST)
    Out of Stock
  • Low Angle Jack Plane

    From $409.00 (inc GST)
  • Low Angle Small Bevel-Up Plane 05-P-3901

    $329.00 (inc GST)
  • Low Angle Smoothing Plane 05-P-2501

    $349.00 (inc GST)
  • Low-Angle Block Plane Chamfer Guide 05-P-2210

    $42.00 (inc GST)
  • Low-Angle Block Plane Handles

    From $19.00 (inc GST)
  • Magnetic Corner Cleaning Chisel 50-S-0101

    This chisel is designed specifically for squaring off the corners of routed hinge gains. The 3/8" square blade is precision ground with a 35° bevel on each face, made of long-wearing A2 tool steel, and hardened to Rc60. Though it can be used on its own, greater accuracy is ensured by use of the 2" tall anodized aluminum guide block.

    » View More

    $69.00 (inc GST)
    Out of Stock
  • Magnetic Saw Guide - Straight 05-T-0401

    $72.00 (inc GST)
  • Magnetic Saw Guide Saw Only 05-T-0203

    $44.00 (inc GST)
  • Magnetic Saw Guides

    From $51.00 (inc GST)
  • Mini Carbide Burnisher 05-K-2030

    $22.00 (inc GST)
  • MK II Sharpening System

    The key to consistent and fast honing is repeatability – and this guide delivers it in spades. Whether you're a sharpening veteran or just starting out, this versatile guide lets you concentrate on sharpening without worrying about controlling blade angle at the same time. This makes your honing reliable, accurate and consistent.

    The original standard Mk II honing guide includes the standard clamping head, straight roller base and angle registration jig. It's the option most useful for woodworkers who mostly use planes and other wide blades. It accepts blades between 12.7mm and 73.0mm wide and up to 11.9mm thick, including skew blades. It hones bevel angles from 15° to 54° and back bevels from 10° to 20°.

    Offering an impressive range of angle settings, the integral blade angle registration jig squares the blade and sets the bevel angle in one easy step. A scale and sighting mark help center blades when using the standard head. Once the blade is clamped, the jig slides off the guide.

    The optional Veritas Skew Registration Jig locks into the MkII honing guide to make quick work of setting both skew and bevel angles (left- or right-hand) of chisel and plane blades.

    The jig's machined aluminum base provides skew angle markings that are laser etched for accuracy and legibility. The skew angle graduations cover the range of 10° to 45° in 5° increments, and there are additional marks (18°, 22°, 28°) to cover the angles of popular skew plane blades.

    The base has four distinct tracks providing four bevel angle settings: 20°, 25°, 30°, and 35°. (The honing guide's eccentric roller allows variation from these angles for creating a micro-bevel.) The unique sliding fence with blade stop allows you to match an existing skew angle visually – even if it is non-standard.

    The included straight roller hones straight edges. At 50.8mm wide, it provides a stable base for even the narrowest of blades. The barrel-shaped camber roller (available separately) lets you rock the guide slightly to hone a slight curve or camber into a blade edge, eliminating blade tracks when planing.

    » View More

    From $119.00 (inc GST)
  • MK II Sharpening System Narrow Blade Holder 05-M-0909

    $86.00 (inc GST)
  • Panel Clamp 05-G-1601

    $81.00 (inc GST)
  • Plane Socks

    From $19.00 (inc GST)
  • Planing Stop 05-G-2301

    $44.00 (inc GST)
  • Prairie Dog 05-G-1022

    $48.00 (inc GST)
  • Router Plane & Accessories

    From $269.00 (inc GST)
  • Router Plane Inlay Cutter Head Set 05-P-3845

    $91.00 (inc GST)
  • Scraper Jointer/Edger 05-M-0701

    $36.00 (inc GST)
  • Scraping Plane

    From $299.00 (inc GST)
  • Shooting Plane 05-P-5471

    $549.00 (inc GST)
    Out of Stock
  • Snug Plug Cutters

    From $30.00 (inc GST)
  • Speed Frame Clamp 05-F-0120

    $65.00 (inc GST)
  • Square Cabinet Scraper Set 05-K-3010

    $35.00 (inc GST)
  • Steel Honing & Lapping Plate 05-M-4001

    $44.00 (inc GST)
  • Stone Pond 05-M-2006

    The Stone Pond is a complete system to store, use and maintain water stones up to 305mm long. Stones can be stored, ready for use, in a stand that also clamps them and provides a base for lapping. The twin-clamping system holds both coarse and fine stones at the same time and the quick-acting cam clamps are fully adjustable. There is ample space for three or more bench stones. Stones are kept clean and evaporation is minimized.

    The clamp hardware is stainless steel, anodized aluminum, and glass-reinforced plastic. The tough, rigid ABS case has high-friction pads for non-slip use. The lapping system is a glass plate, a sheet of PSA-backed plastic laminate, and 90x silicon carbide. The safety-glass top is guaranteed to be flat enough to allow you to lap a stone to a flatness better than 0.025mm per 25mm of stone length. You can put your coarse stone (800x, 1000x or 1200x) in the water and leave your wooden-based finishing stone (4000x or 8000x) clamped on a bar. For stones sitting in the water, ribs on the box bottom keep them clear of any sludge. The clamping and lapping part of the system can be used equally effectively with oil stones.

    This is a fast, clean, dependable system for use with all of your bench water stones.

    » View More

    $100.00 (inc GST)
  • Surface Clamp 05-G-1901

    $119.00 (inc GST)
  • Taper Gauge 05-N-3803

    $65.00 (inc GST)
  • Tennon Handsaws

    From $199.00 (inc GST)
  • Traditional Hold-Down 05-G-1401

    $149.00 (inc GST)
  • Tri Burnisher 05-K-3201

    $58.00 (inc GST)
  • Variable Burnisher 05-K-3701

    $58.00 (inc GST)
  • Wheel Mortice Head Gauge

    From $95.00 (inc GST)
Results 1 - 85 of 85 Show: Sort By: