Baladonia Power Tool Guide Rail System

  • On Sale

    Baladonia Power Tool Guide Rail System

    An easy-to-use, heavy-duty power tool guide rail system

    When cutting panel product using a saw or router, most people muck around with a straight edge and two clamps, wasting time making sure its square and fixed in place and then the clamps get in the way anyway!

    The Baladonia power tool guide is a low-profile tool guide with a built-in cam clamp that sits under the board and out of the way. The jaws automatically pull the guide close to square (with slight adjustment from aligning with a try-square) and can be quickly clamped in place and removed within seconds.

    Power Tool Guide with Quick Clamp is available in both a 24 inch (610mm) and 50 inch (1270mm) version.

    Available separately is the 300mm Guide Traveler

    If you want to make sure the cut is accurate, square and repeatable make the small investment in the 300mm guide traveler. Cut and drill a 12mm MDF base to bolt your power tool in place and then mount to the traveler using the included bolts and knobs. Then run the traveler in the captive groove for maximum accuracy.

    Want to see the guide rail in action with a traveler? See our YouTube video!

    24in | 610mm Long
    $24.90 Clearance! (inc GST)
    RRP: $39.90
    Out of Stock
    50in | 1270mm Long
    $34.90 Clearance! (inc GST)
    RRP: $64.90
    Out of Stock
    Guide Traveller
    $16.90 Clearance! (inc GST)

Product Video