Catalogue - Clamping - Vices & Accessories

Home / Clamping / Vices & Accessories

Products: 1 - 8 of 12

Page: | 1 , 2

Two Way Cross Slide Vice - CSV-4
Solid cast iron construction with accurate sliding mechanism. The vice slides on two dovetailed channels to ensure the vice remains stable when being adjusted. The vice can hold pieces up to 100mm wide and is great for fine adjustment when making mortice joints and accurately positioning work for drilling. Both directions feature adjustment to ensure parallelism with an integral stop for production work. Jaw faces can be replaced with non-marring wooden faces (not included).

Front Vice Screws - TBFV-1
Front vices are the most common type of woodworking vice. A solid cast iron plate mounts underneath the bench and a jaw is mounted on the front of the vice. Three posts (two guide posts and a screw) allow for smooth adjustment action.
Read More...

Qty:

$44.90 inc GST

TBFV-1

Small Front Vice Screw

Qty:

$79.90 inc GST

TBFV-2

Large Front Vice Screw

Shoulder Vice Screw - TBSV-1
Shoulder vices are a specialty vice found on Scandinavian-style workbenches. Usually there is L-shape cut away from the bench. The screw mounts on the L bracket and protrudes through, where a jaw is adjusted via the screw to clamp a work piece against the remainder of the workbench. Perfect for working on table legs! This screw has the same 29mm solid steel bar for heavy-duty clamping applications.
Read More...

Soft Jaws - GJ-913
Turns a metal vice into a woodworking vice. Powerful magnets hold these versatile rubber jaws in place. Available in 3 sizes, they have a myriad of uses. Illustrated on drill press vice. (Vice not included)

Qty:

$11.90 inc GST

GJ-913

75mm

Qty:

$15.90 inc GST

GJ-916

150mm

Qty:

$13.90 inc GST

GJ-914

100mm

Drill Press Vices - DPV-4
Solid cast iron vice. Can be turned at any angle to align slots to enable them to be bolted to most drill press tables. Will also take protective soft jaws (see Soft Jaws). Jaw opening equivalent to the width.

Qty:

$19.90 inc GST

DPV-4

100mm

Qty:

$34.90 inc GST

DPV-6

150mm

Angle Vice - GD-1334
Tilts up to 45 degrees. Full cast iron construction. An indispensible tool for any woodworking or metal workshop. The tilting action is operated on two dovetailed slides and a quick release handle that allows for quick and accurate re-adjustment to the required angle. Beware of other versions that still require a spanner to change angles! 100mm capacity

Quick Action Vices - D-63144
This unique Australian designed vice will revolutionise your workbench. The front jaw will pivot up to 10 degrees both ways for out-of-square clamping operations, the front jaw will also slide up 16mm to act as a full peg. The main screw and nut is fully enclosed to decrease wear on the working parts. Both vices are quick-action. Australian innovation at an affordable price. Made in Taiwan.

Qty:

$209.00 inc GST

D-63144

175mm

Qty:

$289.00 inc GST

D-63218

250mm

Shoulder Vice Screw - 70-G-0151
This vice screw is specifically for the type of “L” shaped shoulder vice used on Scandinavian style benches. It has a 28mm diameter screw with single lead Acme threads. 330mm overall.

Qty:

$44.50 inc GST

70-G-0151

Product Grouping Name

Qty:

$9.90 inc GST

05-G-1203

Vice handle

Products: 1 - 8 of 12

1 , 2

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au