Catalogue - Routing - Torquata Router Bits

Home / Routing / Torquata Router Bits

Products: 1 - 8 of 50 Page: | 1 , 2 , 3 , 4 , 5 , 6 , 7 Combination Trimmer Bits - CTB-22 Used in a trimmer or 1/4in router, these bits make fast work of trimming up edges of melamine and laminates as well as solid timber. It can be used to trim parallel with the edge or your choice of a chamfer along the top edge of the work piece being trimmed. S = Shank size, D = Diameter, H = Height (cutting) Qty: $21.90 inc GST CTB-22 S = 1/4in, D = 11.9mm, H = 12.7mm. Cutting Angle 0-22 degrees       Qty: $21.90 inc GST CTB-30 S = 1/4in, D = 11.9mm, H = 12.7mm. Cutting Angle 0-30 degrees       Qty: $21.90 inc GST CTB-45 S = 1/4in, D = 11.9mm, H = 12.7mm. Cutting Angle 0-45 degrees       Multi-Profile Bits - MFM-35-B The possibilities are limitless with this multi-profile bit. Adjust the height to use a different part of the cutter and make your own unique edge mouldings. Available in 1/4 and 1/2in shanks to suit all size projects. S = Shank size, D = Diameter, H = Height (cutting) Qty: $79.90 inc GST MFM-35-B S = 1/4in, D = 34.9mm, L = 25.4mm       Qty: $99.00 inc GST MFM-57-BH S = 1/2in, D = 57.2mm, L = 47.6mm       Butterfly Key Spline Bit - BKS-286-H This bit can make strong butterfly key spline glue joints, just by running this bit on both sides of a piece of timber, and then cutting the corresponding groove with a dovetail bit of the same angle. Alternatively use it as a decorative effect by cutting vertically with the corresponding dovetail bit for great unique effects. Shank size = 1/2in, D = 28.6mm, L = 45mm, Angle 14 degrees. Qty: $44.90 inc GST   Crown Moulding Bit - CM-56-H Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm. Qty: $74.50 inc GST   Crown Moulding Bit - CM-57-H Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm. Qty: $74.50 inc GST   Crown Moulding Bit - CM-58-H Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm. Qty: $74.50 inc GST   Crown Moulding Bit - CM-59-H Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm. Qty: $74.50 inc GST   Core Box Bits - COB-635 Cut flutes and grooves, for example finger holds on the top edges of doors or the letters in routed wood signs. All bits have a 1/4in shank. D = Diameter of bit, L = Cutter length. Qty: $17.00 inc GST COB-635 D = 6.4mm, L = 6.4mm       Qty: $18.50 inc GST COB-95 D = 9.5mm, L = 9.5mm       Qty: $20.50 inc GST COB-127 D = 12.7mm, L = 9.5mm       Qty: $24.00 inc GST COB-19 D = 19mm, L = 12.7mm       Qty: $39.50 inc GST COB-254 D = 25.4mm, L = 16mm       Products: 1 - 8 of 50 1 , 2 , 3 , 4 , 5 , 6 , 7

---

Home

Back

 

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au