Catalogue - Sawing - Table Saw Accessories

Home / Sawing / Table Saw Accessories

Products: 1 - 8 of 38 Page: | 1 , 2 , 3 , 4 , 5 Hold-Down Clamp Set - HDC-100 Improve the safety of your table saw or router. Simply attach the clamps to your fence and set up the two independent spring steel hold-downs on each arm. The rods are approximately 420mm long and can work approximately 300mm from the edge of the fence. The beauty of this set-up is that they can be attached and removed as required. Will make your safe set-up – especially on the router table, a lot quicker and easier. Qty: $32.90 inc GST   Long Push Stick - PS-20 The popular PS-1 push stick can sometimes be a little bit too small for some applications. This new, larger stick will suit most larger applications. It measures 420mm long (vs. 290mm for the PS-1) and is made of a durable plastic material that will stand up to heavy workshop use. Qty: $6.50 inc GST   Right-Angle Mitre Guide - RAMG-100 A great mitre guide for most table saws where the two most common angles cut is 90 and 45 degrees. The secret is in the two faces. Because you can work from both faces and the angle joining those is exactly 90 degrees, it will cut two angles that make up 90 degrees. So don't worry if you've set the first angle at 44 degrees, because working from the other face, it will cut a 46 degree angle, giving you a snug 90 degree joint. But that's not the only thing that makes this guide great. Read More... Qty: $86.50 inc GST   Router Extension Wing - REW-1 Table saws are a core part of any workshop. But as we've heard from many customers, space is a premium in any workshop. This extension wing replaces the current extension wing on most contractor's and cabinet table saws with a cast-iron plate that allows you to mount your router and use it in a router table setup that takes up the same footprint as your current table saw. 685mm long, 256mm wide & 40mm deep. So how does it fit? Read More... Qty: $230.00 inc GST   Saw Blade Holders - TS-1012 A lot of saw blades come in throw-away packaging which is no good if you need to drop it off to get resharpened and you want to stop it from being damaged when in transit. Blade not included TS-1012 260–305mm blades Read More... Qty: $6.60 inc GST TS-1010 235-254 mm Blade holder       Qty: $9.90 inc GST TS-1012 260-305mm Blades       Qty: $9.90 inc GST TS-1012 260-305mm Blades       Hold-Down Clamps - HDC-50 One of the most popular accessories for T-Track are these simple hold-downs. Shaped to pivot from the worktable and hold the work piece down to that table, they are easy to operate and very cost effective. The ends of these clamps are rounded to virtually eliminate marking the work piece when used. Sold as a set of two Qty: $19.90 inc GST   T-Track System - TTR-24 T-Tracks are great for using as hardware in your shop made jigs. Straight, accurate aluminium is light-weight but offers great rigidity when mounted. PLEASE NOTE: The weight shown is the SHIPPING WEIGHT, not the actual weight. Read More... Qty: $23.90 inc GST TTR-24 610mm - 24in long       Qty: $26.90 inc GST TTR-36 914mm - 36in long       Qty: $29.90 inc GST TTR-48 1220mm - 48in long       T-Track Bolts - TTB-25 T-Track is almost impossible to use without the correct hardware. We have provided a range of T-Track bolts and knobs in the 5/16” size. This size is perfectly suitable for the Torquata T-Track, however, for the Incra system, a slight sand of the bolt head is required to fit it into the slot. This would take minimal time on a linisher. Qty: $13.90 inc GST TTB-25 1in - 25.4mm Pack of 10       Qty: $20.90 inc GST TTB-63 2 1/2in - 63.5mm Pack of 10       Products: 1 - 8 of 38 1 , 2 , 3 , 4 , 5

---

Home

Back

 

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au