Catalogue - Cabinet Fittings - Hinges

Products: 1 - 8 of 18

Page: | 1 , 2 , 3

Brass Slot Hinges - 2315-KPR
A very effective method of joining the box to the lid. Simply cut a 1/16in thick slot into the box and top and then slide these hinges into place. The slots are barbed so while they are easy to drive in, they are virtually impossible to get out again. Perfect for boxmakers that have a lot of boxes to join together. Each hinge measures 16 x 22mm.

Qty:

$2.20 inc GST

2315-KPR

Pack of 2

Qty:

$8.00 inc GST

2315-KPT

Pack of 10

Self-Closing Hinge Drill Guide - HHC-01
A fantastic set to make the drilling of self-closing hinges a breeze. Included is a saddle which sets the centre point of the hole required the correct distance from the edge of the timber, and mark your centre point, and suggested screw holes with the included automatic centre punch. If these holes aren't correct, you can re-drill the guide to suit. Then, with the high-speed steel forstner-style bit provided, place the centre spur into the depression and drill to the required depth.

Fancy Brass Hinge - WIA-0076
These hinges have an electroplated brass finish. The first measurement is the width point to point and the second measurement is the length when fully open.

Qty:

$12.20 inc GST

WIA-0076

35x55mm pair

Qty:

$11.10 inc GST

WIA-0075

44x77mm pair0

Full Overlay Self Closing Hinges - HFO-110
These European standard hinges require a 35mm mounting hole on the inside of the door to recess. The hinge opens to 110 degree of the original position. These hinges have no offset crank so they cover the full face of the cabinet edge. Each hinge has a clip-on mounting bracket to allow for easy mounting and removal of the hinge.

Concealed Barrel Hinges - CH-506
Just drill the correct diameter hole and slip these hinges in. The 5mm hinge needs to be glued, whereas all others just have a friction fit expanding screw to tighten. Priced per pair.

Qty:

$14.30 inc GST

CH-506

10mm Diameter

Qty:

$14.30 inc GST

CH-508

12mm Diameter

Qty:

$15.90 inc GST

CH-510

16mm Diameter

Jewellery Box Hinges - Pin & Screw Type - 802-PR
Each hinge is made of electro-coated brass and features two hole sizes. One hole size will allow small brass screws to be used, while the other requires escutcheon pins to be used when fixing to the workpiece. The first size denotes the length of the hinge, while the second size denotes the overall width of the hinge when open.

Qty:

$2.20 inc GST

802-PR

Pin Type 15x9mm Pk 2

Qty:

$8.10 inc GST

802-PT

Pin Type 15x9mm Pk 10

Qty:

$2.20 inc GST

813-PR

Pin Type 20x12mm Pk 2

Qty:

$8.00 inc GST

813-PT

Pin Type 20x12mm Pk 10

Qty:

$14.50 inc GST

2942-PT

Screw Type 20x12mm Pk 10

Qty:

$3.50 inc GST

2942-PR

Screw Type 20x12mm Pk 2

Qty:

$4.60 inc GST

2165-PR

Screw Type 25x12mm Pk 2

Qty:

$13.00 inc GST

2165-PT

Screw Type 25x12mm Pk 10

Qty:

$4.50 inc GST

2497-PR

Screw Type 35x12mm Pk 2

Qty:

$13.80 inc GST

2497-PT

Screw Type 35x12mm Pk 10

No Overlay Self Closing Hinges - HNO-110
These European standard hinges require a 35mm mounting hole on the inside of the door to recess. The hinge opens to 110 degree of the original position. These hinges have a 15mm crank which means when using 19mm doors, the hinge does not overlap the mullion (cupboard frame) at all. Each hinge has a clip-on mounting bracket to allow for easy mounting and removal of the hinge. Supplied as a pack of two.

Cast Iron Hinge - CI-3795
This hinge is 135mm long and 85mm wide at its widest point. It is made of solid cast iron. These hinges are sold individually.

Products: 1 - 8 of 18

1 , 2 , 3

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au