Catalogue - Sawing - General Handsaws

Home / Sawing / General Handsaws

Products: 1 - 8 of 12

Page: | 1 , 2

Tennon Saw - 195-W
A traditional tool for making tennon cuts into the timber. Used today for fine cut-off work and some large dovetail cuts. The blade is made of Crown's high-grade alloy steel for superior edge holding. Each tooth is ground and set so that it can be used straight out of the pouch, without any further work required. Maximum cutting depth is 75mm. An excellent quality saw from Sheffield, England. 300mm blade, 13tpi.

Straight Saw Guide - 05-T-0401
After receiving many requests from customers for a 90° version of the dovetail saw guides, Veritas has developed a right-angle saw guide for making finger joints, cutting tenons, or on-the-spot trimming of small items. It is also ideal for beginners or children learning to make perfectly square perpendicular cuts on board ends.

Compound Mitre Saw - F-5080
45° Left and Right Tilt Solid cast alloy body saw with 45º - 90º graduations either side of the blade. Blade Length: 600mm Blade Width: 45mm Saw Cut Width: 90mm Saw Cut Height: 120mm Table Length: 400mm Assembled Length: 800mm

Dovetail Saw - 188-W
Similar to the tennon saw, this saw is designed to cut smaller dovetails and other fine joints. It has all the same features as the larger tennon saw, but features a shorter blade, a smaller cutting depth of 65mm and a finer tooth configuration for a smoother cut. The size of this saw makes it easy to control fine and accurate cuts. 200mm blade, 20tpi.

Dovetail Saw & Markers (sold sepret) - 05-T-0201
Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas® has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
Read More...

Qty:

$84.70 inc GST

05-T-0201

1:6 for softwoods

Qty:

$39.90 inc GST

05-T-0203

Saw

Qty:

$84.70 inc GST

05-T-0202

1:8 for hardwoods

Reversible Offset Saws - 187-RS
The handle has a 'kick' in the shaft so a flush cut can be made without the handle getting in the way. The blade attaches to the handle with knobs so it can be used right or left handed. • Allows access right to the edge • Can be used in either left or right configuration • Quality Sheffield steel blade • Rosewood handle

Rigid Flush Cutting Saw - 187-V
With set in only half the teeth (and those are set away from the face), this saw does a neat job of cutting off pegs or dowels without marking the surface, ensuring that no damage can be done. The 75mm x 150mm blade has 10tpi on one side and 11tpi on the other. The cranked handle makes control easy. An excellent and indispensable tool.

Flush Cutting Saw - 05-K-3401
Traditionally used for rapid trimming of plugs and dowels flush with a surface, these flush-cutting saws can be used anywhere that you want to cut off a projection without damaging the adjoining face. This is possible because the teeth are set one way only. The 22tpi Japanese style tooth pattern blade cuts aggressively (on the pull stroke) but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good con

Qty:

$54.00 inc GST

05-K-3401

Single Edge

Qty:

$55.46 inc GST

05-K-3601

Double Edge

Products: 1 - 8 of 12

1 , 2

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au