Catalogue - Safety - Dust Extractor Accessories

Home / Safety / Dust Extractor Accessories

Your health and safety can never be underestimated, particularly when working with tools and machinery. These accessories are ideal for customising the dust extraction system in your work area.  They enable you to attach multiple woodworking machines and collection points at varying distances from your dust extractors, depending on their capabilities. Products: 1 - 8 of 17 Page: | 1 , 2 , 3 Y-Piece Connector - YW-1015 Perfect to convert a single 4” connection into a twin 4” hose connection. Design provides smooth convergence and minimises blockages compared to a T-Piece. Qty: $29.15 inc GST   Dust Separator - YW-1033 A common problem for most extraction systems is the constant emptying of collection bags, or damaged impeller fins with large scrap pieces in the waste being removed. This separator can solve both problems. Simply cut a large enough hole in the lid of a standard 44-gallon drum to make a flange for the Dust Separator, attach the hose from your extractor on one outlet and the hose from your machine etc. on the other and it acts as a collection unit for the extractor. Read More... Qty: $47.90 inc GST   Quick Change Blast Gate - YW-1057 Quite a few customers use one dust extractor for most workshop tools to save on money and space. This blast gate has been designed to help these customers by reducing the amount of hose required as well. One side of the blast gate has a standard shape so the hose can be clamped securely in place. The other end, however, is shaped so that hose can easily be attached and removed as required. Suits 4in hose only. Qty: $14.90 inc GST   Plastic Dust Hood - YW-1068 Many customers want to set up their own collection stands next to their work piece. The problem is finding the right connector as a chute. This dust hood can solve many of these workshop problems. It has a reasonable mouth opening of approximately 250 x 110mm and is tapered for efficient dust flow. It is great as a basic to build a larger hood or simply installing on a workbench or machine to collect dust near the action – such as a drill press. Qty: $28.10 inc GST   Large Dust Hood - S-070790 A great addition to your lathe! This hood has an amazing 420 x 320mm opening to collect large quantities of shaving and funnel it to standard 4in pipe – so easy to hook up to a standard extraction system! It has a leading lip around the outside edge of the opening, so it can be pre-drilled and screwed into place. But it may not suit just the lathe; it can suit just about any situation where extraction outlets aren’t available or easy to install. Read More... Qty: $29.90 inc GST   plastic Collection Bags - PBAG-110 Plastic collection bags are used inside the bottom bag of two-bag dust extractors, where Needle Felt Bags or Pleated Filter Cartridges are fitted in place of the standard top bag. This is done to maximise the fine dust filtration of the Needle Felt Bag or Pleated Filter Cartridge, where fitted. PBAG-110 is for 1HP extractors and PBAG-210 is for 2-3HP extractors. Pack of 10. Qty: $27.90 inc GST PBAG-110 Suits 1HP extractors       Qty: $36.15 inc GST PBAG-210 0Suits 2-3HP extractors       Pleated Filter Cardtridges - PFC-1610 Most standard bags will only filter 30 microns, or even a needle felt bag down to 10 microns at best. There are two options to solve the problem of getting dust out of the air – either invest in an air cleaning filter, or add a pleated filter cartridge to your extractor. These cartridges filter down to 1micron dust particles out of the air so it easily removes dust of any dangerous size that can do harm to your health. Read More... Qty: $179.00 inc GST PFC-1610 Suits 1HP units 370x610mm       Qty: $429.00 inc GST PFC-21220 Suits 2 or 3HP units 500x1220mm       Qty: $858.00 inc GST PFC-21220-2 Pack of 2 Cartridges - Suits 2 or 3HP units 500x1220mm       Qty: $299.00 inc GST PFC-2610 Suits 2HP units 500x610mm       Connector 100mm - YW-1019 Want to extend the length of your 4” hose without having to buy a whole new length? This connector provides the answer, allowing 2x 4” hoses to be joined inline. Qty: $18.10 inc GST   Products: 1 - 8 of 17 1 , 2 , 3

---

Home

Back

 

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au