Catalogue - Drilling - Drilling Accessories

Home / Drilling / Drilling Accessories

Products: 1 - 8 of 8 Drill Press Material Support - DPS-100 Material support for drill presses has long been a problem that can now be solved by adding this material support on to your drill press post. It suits drill presses that has a 38 – 121mm diameter post – so it will fit all standard woodworking drill presses. The rollers are adjustable 200 – 600mm from the centre, allowing you to provide up to 1200mm wide support on work-pieces – which should alleviate most support problems. The rollers are height adjustable over a 200mm range. Qty: $69.90 inc GST   Drill (Jacobs) Chucks - DCA-101 Whether it’s replacing your current drill chuck or mounting in the tailstock of your lathe for drilling purposes – a chuck is a great addition to the toolbox. This range of chucks has been matched and includes the arbor (and chuck key) with the chuck, to ensure that fitment is as painless as possible. These chucks comes from one of the biggest OE manufacturers of drill chucks in the world and this particular range comes from their professional & industrial series – so quality is assured. Qty: $24.90 inc GST DCA-101 Capacity: 10mm, Arbor Size: #1MT       Qty: $25.90 inc GST DCA-102 Capacity: 10mm, Arbor Size: #2MT       Qty: $27.90 inc GST DCA-131 Capacity: 13mm, Arbor Size: #1MT       Qty: $28.90 inc GST DCA-132 Capacity: 13mm, Arbor Size: #2MT       Qty: $34.90 inc GST DCA-161 Capacity: 16mm, Arbor Size: #1MT       Qty: $35.90 inc GST DCA-162 Capacity: 16mm, Arbor Size: #2MT       Keyless Drill Chucks - DCAK-131 Heavy-duty keyless chucks are fast becoming a popular choice for drilling operations in many workshops. Their ease of use is the main benefit as a chuck key is no longer required to tighten the chuck properly. The keyless chucks are also engineered to very high standards so that the ultimate in drilling accuracy is attained. The keyless chucks are also from the OE manufacturer for many major quality brands so accuracy is assured. Qty: $57.90 inc GST DCAK-131 Capacity: 13mm, Arbor Size: #1MT       Qty: $58.90 inc GST DCAK-132 Capacity: 13mm, Arbor Size: #2MT       Qty: $64.90 inc GST DCAK-161 Capacity: 16mm, Arbor Size: #1MT       Qty: $65.90 inc GST DCAK-162 Capacity: 16mm, Arbor Size: #2MT       Easy-Riser Kit - ERK-100 Ever gotten frustrated by the rack and pinnion height winding system on your drill press? Does it take too long to wind it to the place where you need it for the next job? Does it catch on the ring when you try to swing it out of place? Well, if the answer is yes to one or both questions - you need the Easy Riser Kit. Invented in Australia by Terry Gosschalk of Piric Design (famous for his WASP sanding attachment), this kit will suit all drill presses on the market today with minimal modificatio Read More... Qty: $79.90 inc GST   Drill Press Table - DPS-50 Drill Press Table • Perfect companion for drill presses • Slides on two embedded t-tracks • Sacrificial insert can be replaced • Clamps to hold on table included • Table size 610 x 300mm • Integral 80mm high fence • T-tracks can take standard t-track accessories • Perfect accessory is hold-down clamps (HDC-50) Qty: $69.90 inc GST DPS-50 Drill Press Table Only       Qty: $139.80 inc GST DPS-50-100 Drill Press Table PLUS DPS-100 Drill Press Material Support       Drill Guide Attachment - UGD-35-AL This deluxe drilling guide allows you to drill holes at an angle into your timber, cleanly and accurately. Constructed of a high-quality alloy with steel guide arms and a top-quality 10mm capacity drill chuck driven by a twin sealed bearing drive system, the guide has graduations in 5 deg increments in a full 180 degree range and stops at all common woodworking angles - 15, 22.5, 30 & 45 deg. It also features a cradle for holding round material to make the most difficult drilling application Qty: $89.90 inc GST   7 Piece Split Stop Collar Set - COLLAR-7 Control the depth you drill. A range of collars which will fit drill bits 3-13mm diameter. Because of the split design, they are flexible and able to fit onto Imperial bits of a similar size as well, 1/8in to 1/2in. Qty: $19.90 inc GST   Chuck Adapters - S-16002 These morse taper converters will slide onto an arbor to convert it to a larger size arbor. Also useful with lathes accessories to change centre shaft sizes. MT = Morse Taper Qty: $19.90 inc GST S-16002 #1MT - #2MT       Qty: $24.90 inc GST S-16003 #2MT - #3MT

---

Home

Back

 

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au