Catalogue - Joining - Dowelling

Home / Joining / Dowelling

Products: 1 - 7 of 7 Dowelling Jig - BDJ-1 This simple innovative, but versatile jig was invented in Australia. It bolts to a bench and can be used for parallel jointing boards, mitre joints, corner joints and even the difficult task of locating dowels when jointing shelves to uprights. For use with 3/8" and 1/4" dowels, the jig is case hardened to ensure it remains accurate. Read More... Qty: $54.90 inc GST   Dowelling Jig - 05-J-0801 This jig will not only do centered dowelling, but it will dowel boards of different thicknesses to one reference face – the assembly is perfectly flat on one side and all thickness variations are on the other side. This saves a lot of planing and scraping time. Using a dial, each micrometer clamp head can be set from 1/4" (6mm) to 1/2" (13mm) from the center line to handle work from 13mm to 25mm thick. Read More... Qty: $73.04 inc GST 05-J-0610 Gauge Head for Veritas Dowel Jig       Qty: $170.20 inc GST 05-J-0801 Dowelling Jig Only       Self-Centering Dowelling Jig - DJ-21 A simple and very effective dowelling jig for use on butt and right-angle carcass joints. Simply adjust the jig to saddle your work piece (9.5-60mm thick) and clamp. Viewing windows are cut into the front face so that you can line up the centre lines with the marks on your work piece. The jig automatically centres itself on the work piece. Then screw in whichever size hardened steel bush you require (1/4, 5/16, 3/8, 7/16 and 1/2) and drill to the required depth. Read More... Qty: $91.50 inc GST   Drill Stops - H-710 H-710, Haron - Set of 6 Drill stops 5, 6, 8, 10, 12 and 16mm Qty: $7.60 inc GST   Pre-Cut Fluted Dowels - DJ-6100 Make the dowelling job easier by using ready cut dowels. The use of standard dowel is not ideal, as the multi-groove design allows glue seepage along the length of the dowels. Each dowel also has a tapered edge on both ends to allow for easier fitting into a dowel hole. Qty: $12.96 inc GST DJ-6100 6mm Pk 100       Qty: $29.16 inc GST DJ-6250 6mm Pk 250       Qty: $11.92 inc GST DJ-8100 8mm Pk 100       Qty: $26.82 inc GST DJ-8250 8mm Pk 250       Qty: $10.92 inc GST DJ-9100 9.5mm Pk 100       Qty: $24.57 inc GST DJ-9250 9.5mm Pk 250       Qty: $87.40 inc GST DJ-91000 9.5mm Pk 1000       Qty: $10.92 inc GST DJ-10100 10mm Pk 100       Qty: $24.57 inc GST DJ-10250 10mm Pk 250       Qty: $87.40 inc GST DJ-101000 10mm Pk 1000       Dowel Kits - H-54060 A set which represents good value for dowelling which includes drill, drill stop, 4 x centre points, 20 fluted dowels in each of four sizes. Qty: $11.90 inc GST H-54060 6mm - Haron       Qty: $14.90 inc GST H-54080 8mm - Haron       Qty: $16.50 inc GST H-54100 10mm - Haron       Dowel Points - H-5418 These centre points can be inserted in the dowel holes drilled in one piece of wood. When the two pieces of wood are pressed together the points mark the position for drilling the matching holes in the second piece of wood. All are supplied in packs of 4. Qty: $4.73 inc GST H-5418 For 1/4in dowels       Qty: $5.96 inc GST H-5420 For 8mm dowels       Qty: $8.67 inc GST H-5422 For 10mm dowels

---

Home

Back

 

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au