Catalogue - Woodturning - Crown Specialty Turning Tools

Home / Woodturning / Crown Specialty Turning Tools

Products: 1 - 8 of 21

Page: | 1 , 2 , 3

Beadforming Tools - 276-W
The perfect tool for cutting accurate beads exactly the same size every time. Handle length = 320mm, Blade length = 165mm.

Qty:

$49.50 inc GST

276-W

Wdith: 6mm, Handled

Qty:

$49.50 inc GST

276-AW

Width: 10mm, Handled

Chatter Tool - GRCT
Many turners say that they get enough accidental chatter on their work already, without doing it deliberately! However, the Chattertool allows an extra decorative option than can make flat or domed surfaces far more interesting than it might be if left plain. It is most effective on end grain, and will work on most hardwoods. If used on a bland wood, then the work can be greatly enhanced using colour (see U Beaut’s water dyes). Comes with a half-round and flat tip.
Read More...

Dovetail Cutting Tool - 267-XW
Another Crown specialty tool has been added to the range. This tool is universally brilliant as it cuts perfect dovetails to suit dovetailed jaws on scroll chucks. It can cut either internal or external dovetails with ease. This tool should be acquired by every bowl turner. Instructions on use and sharpening included. Blade length = 165mm, handle length = 210mm

4pce Turning Tool Set - C-283
The perfect set for the spindle turner. This set has been specified by Timbecon and is really a great beginner’s set. Each chisel has the Timbecon specified 12 1/2in handle for comfortable use. It includes a 19mm roughing gouge, 10mm spindle gouge, a rolled edge 19mm skew chisel and a 3mm parting tool. For more information on each tool, please refer to the Crown Turning Tools section of the website where there is a wealth of information on turning tools.

Bill Jones Armrest - BJAW
This tool, developed in conjunction with the well known British woodturner Bill Jones, is an additional tool rest to aid working at the face, boring, hollow turning and inside screw cutting with hand chasers.

Barley Twist Gouge - 2385-W
Used either with the lathe switched off, or with a variable speed lathe at a very low setting, this tool is ideal for producing the perfect ‘twist’ shape. Only available handled. Handle length = 105mm, Blade length = 105mm.

Bill Jones Round Nose Scraper - 260-BW
The front and sides of this unique Bill Jones tool will turn beautifully and gently without dig-ins, so it can be used for delicate roughing where a gouge might be dangerous. A Crown specialty tool. Handle length = 100mm, Blade length = 180mm. Diameter = 3mm.

Alan Beecham Skewchigouge - 236-SKW
This tool is exclusive to the Crown turning tool range. As the name suggests, you can use it as a spindle gouge and skew chisel; the two most common chisels used in spindle turning. Simply use it face upwards as a 10mm spindle gouge, then turn it 90 degrees and it can be used to turn accurate shoulders. Very useful! Includes instructions on use and sharpening. Handle length = 320mm, Blade length = 185mm

Products: 1 - 8 of 21

1 , 2 , 3

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au