Catalogue - Woodturning - Chucks & Faceplates

Home / Woodturning / Chucks & Faceplates

Products: 1 - 8 of 22

Page: | 1 , 2 , 3

Nova Stepped Jaws - JS-75-DT
These step jaws are designed primarily to grip in the contracting mode, the base (foot) of footed bowls. The step sizes provide optimum gripping for three foot sizes with minimal crush damaged wood. There is also an expanding dovetail made for alternative recess gripping of bowls.

Standard Jaws - JS-25-N
Designed for small bowl (expanding dovetail mounting up to 150mm diameter) and small spigot (contracting mode) free end turning work (up to 125mm long). Ideal for gripping work below the size that can be handled by the standard 50mm jaws. CHUCK BODY NOT INCLUDED

Standard Jaws - JS-100-N
The 100mm jaw set is designed for an expanded dovetail grip (up to 355mm diameter), reverse dovetail grip for gripping footed bowls, with a limited spigot facility (up to 150mm long) and provision to mount false wooden jaws, so customised jaws can be made for special purposes. They are made for a larger range of work than the standard 50mm jaws or step jaws. CHICK BODY NOT INCLUDED

Standard Jaws - JS-130-N
These jaws are designed to handle very large work up to 750mm in diameter. With these jaws you don't run out of capacity using Nova Chucks. Ad ideal companion to the SuperNova2 chuck as the extra power of the SuperNova2 matches the big capacity of these jaws. No need to consider larger chucks or faceplates. Provision to mount false wooden jaws (so that customised jaws can be made for special purposes) CHUCK BODY NOT INCLUDED

Pin Jaws - JSPIN
These special 25mm extended jaws are designed to act like a pin chuck - expanding into a pre-bored hole. This is an especially useful technique for free form edge bowls. A real big advantage over pin chucks though is that you don't have to bore to an exact size - any size between the minimum and just under the maximum expansion will do. CHUCK BODY NOT INCLUDED
Read More...

PowerGrip Jaws - PJSN
For power users with large woodturning projects. The PowerGrip jaw has a capacity of over 75mm square or 90mm round, and an expanding dovetail facility up to 120mm. This gives the capacity for very large turnings, such as with logs (in photo above). Includes special Woodworm and pivot handle. CHUCK BODY NOT INCLUDED

Supernova² Scroll Chuck - TEK-23055
The Supernova² Chuck is one of the most popular chucks worldwide for good reasons. Check out the features! • Fully sealed ultra tough Duracon backing plate with unique indexing function. • Captured pinion which is over a third faster than the original Supernova Chuck with more positive action • Ball nose allen key with comfortable handle that can be tilted away from work piece for easy access • Fully backwards compatible with all Teknatool jaw sets and inserts • Comes with standard 50m

G3 Scroll Chuck - TEK-48202
Released as a perfect companion to the economy lathes available on the market today. It has the following great characteristics: • One handed positive gear action • Small size and weight minimizes load on small spindles & bearings • All Teknatool jaws fit easily to chuck • Suits bowls up to 350mm or spigots up to 150mm (with std jaws) • Comes with standard 50mm jaws and woodworm screw • Need to choose appropriate insert (available separately)

Products: 1 - 8 of 22

1 , 2 , 3

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au