Catalogue - Carving - Carving Sets & Accessories

Home / Carving / Carving Sets & Accessories

Products: 1 - 8 of 13

Page: | 1 , 2

Jeweller's Vice - 05-G-2101
Small parts can be difficult to hold securely and accessibly. The Veritas Jeweller's Vise avoids both these problems. The 12.7mm wide anodized aluminum jaws securely hold small parts up to 9.5mm thick. One jaw has a horizontal V-notch and the other a vertical notch so that round parts can be securely held in either orientation by tightening the 12.7mm brass knob.
Read More...

Qty:

$43.50 inc GST

05-G-2101

Vice Only (Includes wooden handle)

Qty:

$8.90 inc GST

05-G-2102

Mounting Post

CHISEL CRANKED SET - 179PWC
Box of 4 X 1" Blades are beveled and polished Sheffield steel with a 15 degrees offset from the plantation grown Rosewood handles. This allows the blades to lie flat on the work surface and your hands to stay clear. Espcially well suited for cleaning dados.

Palm Carving Chisels - BS-8
This range of chisels is suitable for small detail work. With comfortable pear handles and a short oveall length, these tools excel in relief carving or getting into tight corners on 3D carving projects. Overall length of chisel is 135mm, blade length 80mm.

Qty:

$360.00 inc GST

BS-8

8pce set in storage rack

Qty:

$34.90 inc GST

1-B-12

Qty:

$34.90 inc GST

1-BS-12

Qty:

$34.90 inc GST

3-B-12

Qty:

$34.90 inc GST

5-B-12

Qty:

$35.90 inc GST

8-BA-10

Qty:

$35.90 inc GST

9-B-10

Qty:

$35.90 inc GST

12-B-8

Qty:

$35.90 inc GST

7-B-14

Carver's Screw - 05-G-0801
Turned from a solid bar of brass, this carver's screw, with its tapered tip and high-profile threads, grips securely and guarantees that remounted pieces are held as securely the third and fourth time as they were the first. The hex portion clamps securely in a vise while you thread on a blank, or you can use a wrench. The molded tightening knob has a low-friction brass insert. At 5" long overall, this screw can be used on work surfaces up to 3 3/4" thick in a dog hole 1/2" diamet

Scorp - PFS
Suitable for carving bowls and other concave surfaces.

Carver's Vice - 05-G-2001
A good carver's vise should be adjustable in all three axes. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance so that your work does not suddenly fall or rotate.
Read More...

Qty:

$183.22 inc GST

05-G-2001

Carvers vice

Qty:

$19.96 inc GST

05-G-2002

Mounting assembly

Qty:

$22.50 inc GST

05-G-2004

51mm mounting plate

Qty:

$44.90 inc GST

05-G-2003

88mm mounting plate

Journeyman's Mallet - 05-E-1401
This mallet can be used with a traditional grip or it can be nestled in the palm of your hand to exactly control the force used, a position preferred by carvers and sculptors or anyone doing work finer than mortising. Unique to this type of mallet, the brass head has a blind threaded connection rather than a through hole for the handle; this gives the same feel and force to the 1-5/8" diameter top as the sides.
Read More...

6 Piece Carving Chisel Set - C-220
The ideal beginners set. These small carving tools made from high quality hardened and tempered Carbon steel are fitted with stained Beech handles. The ready honed blades feature 5/16in (8mm) square chisel, 5/16in (8mm) bent square, 5/16in (8mm) skew chisel, 3/16in (5mm) straight gouge, 5/16in (8mm) bent gouge and 3/16in (5mm) bent vee tool.

Products: 1 - 8 of 13

1 , 2

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au