Catalogue - Measuring & Marking - Calipers & Circle Markers

Home / Measuring & Marking / Calipers & Circle Markers

Products: 1 - 8 of 9

Page: | 1 , 2

Proportional Calipers - 05-N-3401
Designed for sculptors and turners, these calipers quickly find a role in any shop. The smallest pair measures 248mm overall and has ratios of 1:1, 1.5:1, 2:1, 3:1 and 4:1. Has a firm joint system where you adjust the amount of joint friction you want with the knurled brass thumbscrews and is useful for scaling up or down as well as direct measurement transfer.

Incra Gauge - IG-8
This versatile tool will greatly increase the accuracy of all your layout, setup and marking jobs. It works as a precision marking gauge, a free standing depth of cut gauge, and a centre finder.
Read More...

Woodturners Calipers - CAL-205
For use in transfering wall thickness measurements from bowls, etc. to the other end of the calipers. An indespensable tool for all woodworkers. Made of nickel plated steel.

Qty:

$14.50 inc GST

CAL-205

Outside - Length 205mm

Qty:

$19.90 inc GST

CAL-350

Outside - Length 350mm

Qty:

$19.90 inc GST

CAL-305

Combination - Length 305mm

Vernier Caliper - VCC-150
Great quality at an affordable price. All measurements are etched into the steel to ensure greater accuracy than painted measurements. All etched measurements are then painted black so the scale is easy to read. Comes with an attractive case to store when not in use.

Qty:

~~$27.50~~ inc GST
$22.00 inc GST

VCC-150

150mm

Until 12 September

Qty:

~~$38.50~~ inc GST
$33.00 inc GST

VCC-200

200mm

Until 12 September

Digital Vernier Calipers - DC-6
An easy tool to use. Similar to all other verniers except that this vernier will read the measurement on a large LCD display, accurate to .001mm. Can also be used to convert measurements from metric to imperial and vice versa by use of a conversion button.

Qty:

~~$54.90~~ inc GST
$33.00 inc GST

DC-6

150mm

Until 12 September

Qty:

~~$64.90~~ inc GST
$44.00 inc GST

DC-8

200mm

Until 12 September

Tool Setting Gauge - 05-N-0101
Most of the tool-setting gauges on the market today suffer from at least one of two main weaknesses. One end or the other will rest totally on the same height as the main table, or they are so thin that it is difficult to ensure that teeth are being gauged at the top of the arc. This height gauge solves both problems.
Read More...

150mm Dial Vernier Caliper - VCCD-150

Until Sun 12-Sep-2010
This highly accurate engineers vernier is made of fine stainless steel to exacting standards. It can measure a 0 - 150mm range in 0.025mm increments. It has a 38mm diameter shockproof and scratch resistant dial that measures 2mm per revolution. It will accurately measure to 0.005mm. This tool is a must for anyone who wants the ultimate in accuracy. Can be recalibrated for long life and comes in a carry case.

Beam Compass Heads - 05-N-5001
The radius of circle or arc you can make with this beam compass set is limited only by the length of timber you have at hand. The heads clamp to any material 16-19mm thick, of any width; no special beam size is required. The heads are held solidly on the beam because each clamping knob also operates a trapped pin that prevents pivoting of the head when it is clamped in position. Comes with two hardened steel points, a pencil, plus the brass and aluminium heads in a handy storage case.
Read More...

Products: 1 - 8 of 9

1 , 2

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au