Product Details - Sanding - Sanding Accessories & Attachments - WASP Drill Sanding Attachment

Consider the following advantages:

The unit comes with a 44mm diameter drive drum but if you want to use it as a drum sander you are not restricted to this size. An accessory kit with 25mm and 60mm drums is available.

It is designed to be used with 610x100mm sanding belts, the most common size used in Australia and is available everywhere. A belt comes with the kit to get you started.

The unit is being powered by a drill press motor which on most drills is a powerful 3/4hp. More than most bench mount belt/disc sanders.

The table of the drill press acts as a big solid table rest which can be set at right angles to the belt or tilted as required - further enhancing the WASP's capabilities.

The unit comes with a flat plate but a curved plate which is included in the accessory kit can be easily fitted.

Belts can be changed in seconds so the grit can be quickly changed to suit the job at hand.

The accessory kit contains three drums and a curved plate. Two of the drums are 28mm and 60mm in diameter to provide different sizes from the original 44mm drum supplied with the original kit. The third drum is also 60mm at the top and bottom but is curved like an hour-glass in the centre of the belt (similar to the flexibility in inflatable drum sanders). The curved sanding plate clips onto the flat plate and if it is not supported in the centre also gives a "soft" sand.

However the plate is flexible and if packers are inserted between the curved and flat plate a curve of whatever radius you require can be formed. Just vary the packers to vary the radius.