Product Details - Sawing - Table Saws - Sliding Table Attachment to suit MJ-2325-B

The sliding table has an integral fence and work piece clamp. The aluminium fence has a stop with a 1050mm capacity. Using the included telescoping arm takes capacity to 1400mm. The integral clamp can be used on material greater than the cutting capacity of the saw. The fence also has a sacrificial plastic insert on its end to minimize break out and this can be replaced with MDF as required. The fence has a protractor to cut material up to 45º in either direction to increase its usefulness.

A great accessory for your MJ-2325-B table saw!

To attach it to the MJ-2325-B saw, remove the left-hand extension wing and bolt this on to the far right of the saw. Included with the sliding table attachment is a support leg to take the weight of two extension wings. You will need to drill the mounting holes to do this, but it can be done with a hand drill and twist drill bit. You also need to slide the fence along so that the sliding table attachment can be mounted. This increases its capacity to the right of blade up to 1270mm. Included in the sliding table attachment is a new scale to re-calibrate the fence.